Access Virus TI
The Access Virus TI is a virtual analogue synthesizer built on two DSPs, sold as a desktop module, as the Polar with 37 keys and as a 61-key keyboard. TI stands for Total Integration: over USB the hardware works as a plug-in inside a computer studio through the VirusControl software, while MIDI In, Out and Thru stay available for standalone use. Each voice has three main oscillators with classic, HyperSaw and WaveTable models, a sub-oscillator, noise, two filters and analogue filter models, and Access gives an average of about 80 voices. The Virus TI holds 20 banks of 128 Single programs, four of them writable, and a Multi mode with 16 parts. Sound On Sound found it worth the wait, noting better effects and more unison voices than earlier Virus models. From the MIDI Dump menu the Virus TI sends the current program, any of the four user banks of 128 programs, an arrangement with its 16 parts, or the multi bank as System Exclusive data. It recognises incoming dumps without a receive mode: single programs land in the edit buffer, while whole banks are stored back in their original bank, sent to a chosen bank, auditioned one by one or only verified, as set in the Receive Dump parameter.
Sign in to upload or commentSysEx messages
0 filesThis instrument is still waiting for its first SysEx.
If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.
Upload a SysExSysEx guide
- Manufacturer ID
- 00 20 33
- Default device ID
- MIDI Device ID 1-16 or Omni; on Omni it accepts any ID and transmits with ID 17
Receiving a dump
1. Set MIDI Device ID to the ID used in the dump, or to Omni. 2. For whole banks, set MIDI Dump RX > Receive Dump to Enable (original banks), To Bank A to D, To Edit Buffer or Verify. 3. Start the sender. No receive mode is needed: single programs land in the edit buffer and must be stored.
Sending a dump from the instrument
1. Open the configuration menu page MIDI Dump TX. 2. In Transmit MIDI Dump choose Single Buffer, Single Bank A to D, Controller Dump, Arrangement, Multi Bank or Remote Patches. 3. Start the transfer. The current program can also be sent from STORE by choosing the destination Send SysEx.
SysEx pitfalls
A single program arrives only in the edit buffer and is lost unless stored. Receive Dump set to Disable ignores incoming programs. The Verify option compares a bank dump with the memory without writing it.
Source: Virus TI Benutzer Handbuch, Revision 1.0.4 (German), pp. 112, 128-131
Specifications
- Synthesis
- Virtual analogue (DSP) with classic, HyperSaw and WaveTable oscillator models
- Polyphony
- About 80 voices on average, over 100 at most; depends on the features in use
- Multitimbrality
- 16 parts in Multi mode
- Oscillators
- 3 main oscillators, sub-oscillator and noise per voice
- Filter
- Two filters (low-pass, high-pass, band-pass, band-stop) plus analogue filter models
- Memory
- 20 banks of 128 Single programs (2,560): RAM-A to RAM-D writable, ROM-A to ROM-P
- Keyboard / format
- Desktop module; Polar 37 keys; Keyboard 61 keys
- Outputs
- Output 1 main stereo, Outputs 2 and 3, headphones, S/PDIF, USB audio
- MIDI
- In, Out, Thru; USB MIDI to a computer
Known issues and maintenance
Programs are kept in battery-backed RAM; Access advises replacing the battery every 4 to 5 years through a dealer, after a backup.
Sources
to be verifiedThese notes have not been checked against the sources yet. Corrections are welcome in the comments.
- Access (Kemper Digital GmbH), Virus TI Benutzer Handbuch, Revision 1.0.4 (German) — Manufacturer manual in a retailer copy: specifications, memory, battery, Device ID, MIDI Dump RX and TX
- Mark Wherry, Access Virus TI, Sound On Sound, December 2005 ↗ — Models and keyboards, shipping date, USB integration, verdict
Sign in to write a comment.
Comments
0