Akai MPC3000
The Akai MPC3000 is a MIDI Production Center: a sampler, drum machine and sequencer in one desktop unit, presented as the successor of the MPC60 in an operator's manual written by Roger Linn and dated May 1994. It samples in 16-bit at 44.1 kHz, holds 2 MB of sample memory that can be expanded to 16 MB, and plays 32 voices, each with a resonant low-pass filter. Sounds are played from 16 velocity- and pressure-sensitive pads in four banks, and the sequencer holds 99 sequences of 99 tracks, sent to 64 MIDI channels through four MIDI outputs. Sound On Sound called it a great piece of gear in October 1994. The Mix praised its pads and simple sequencing for rhythm work, while regretting that SMPTE had become an option and that there was no digital output, no sample looping and no reverb. The MPC3000 keeps its sounds, programs and sequences on floppy or SCSI disk, not in SysEx dumps. Its System Exclusive support has two parts: it can record incoming SysEx messages shorter than 1000 bytes into a sequence track, for example a synth patch sent before a song starts, and from software version 3.1 it can send and receive individual mono sounds in the MIDI Sample Dump Standard format, with or without a dump request.
Sign in to upload or commentSysEx messages
0 filesThis instrument is still waiting for its first SysEx.
If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.
Upload a SysExSysEx guide
- Manufacturer ID
- 47
Receiving a dump
1. Press PROGRAM/SOUNDS, then 9 to open MIDI Sample Dump. 2. If the send screen is shown, press <Send/recv> to show the receive screen. 3. Set MIDI input (1 or 2) and MIDI output (A-D) to the jacks connected to the other sampler, and MIDI channel to the channel it uses. 4. Start the dump on the other sampler, or enter Requested sound and press <Send req> (closed loop only). 5. When the display shows Sound is received, rename it if needed and press <Done>.
Sending a dump from the instrument
1. Press PROGRAM/SOUNDS, then 9 to open MIDI Sample Dump. 2. Press <Send/recv> until the send screen is shown. 3. Set MIDI input, MIDI output and MIDI channel. 4. Select the sound; for a stereo sound choose LEFT or RIGHT in the L/R field. 5. Press <Send>. The display shows Sending sample dump...
Requesting a dump
In closed loop mode (two MIDI cables) the MPC3000 sends a dump request when <Send req> is pressed, and on the send screen it answers a dump request from the other sampler.
SysEx pitfalls
Only MIDI Sample Dump Standard sounds, mono only: stereo sounds are sent one side at a time. Requires software 3.1. SysEx recorded into sequences must be shorter than 1000 bytes and is played back on the channel it was received on. <Cancel> aborts a transfer.
Source: Akai MPC3000 Operator's Manual v3.0, p. 70 (printed), and Software Update 3.1 manual, MIDI Sample Dump (ManualsLib viewer pp. 265-268)
Specifications
- Synthesis
- Sampling, 16-bit linear, 44.1 kHz stereo
- Polyphony
- 32 voices
- Filter
- 12 dB/octave resonant low-pass filter per voice
- Memory
- Up to 128 sounds, 24 programs; 2 MB sample memory, expandable to 16 MB; 99 sequences, 20 songs
- Keyboard / format
- 16 velocity- and pressure-sensitive pads in 4 banks, desktop unit
- Outputs
- Stereo mix output, 8 individual outputs, headphones; S/PDIF digital input only
- MIDI
- 2 MIDI In, 4 MIDI Out (A-D)
Known issues and maintenance
A lithium battery provides memory back-up and should be replaced only by qualified service personnel.
Sources
to be verifiedThese notes have not been checked against the sources yet. Corrections are welcome in the comments.
- Akai MPC3000 Operator's Manual v3.0 (May 1994) with Software Update 3.1 manual (ManualsLib copy) — Specifications, lithium battery, SysEx recording in sequences, MIDI implementation chart, MIDI Sample Dump procedures
- Bob Dormon, Back to the future (Akai MPC3000), The Mix, June 1995 ↗ — Price, specifications, MIDI ports, SDS withdrawn before the 3.1 update, criticisms
- David Mellor, Akai MPC3000, Sound On Sound, October 1994 ↗ — Features, memory, polyphony, outputs, verdict
Sign in to write a comment.
Comments
0