Akai MPC60
The Akai MPC60 MIDI Production Center, released in 1988, was designed by Roger Linn and combines a sampling drum machine with a MIDI sequencer. Its 16 velocity- and pressure-sensitive pads play sounds sampled at 40 kHz and stored in a non-linear 12-bit format, with 16 voices and 13 seconds of sampling time, doubled by an expansion board. The sequencer has 99 sequences of 99 tracks at 96 ppq, two MIDI inputs and four MIDI outputs. Everything is saved to a built-in 3.5-inch floppy drive. The original software sends and receives samples with the MIDI Sample Dump Standard, also to and from an Akai S900; Linn's later Version 3.1 software removed this. The MPC60 can also record other instruments' System Exclusive messages into its tracks and play them back.
Sign in to upload or commentSysEx messages
0 filesThis instrument is still waiting for its first SysEx.
If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.
Upload a SysExSysEx guide
- Manufacturer ID
- 47
SysEx pitfalls
MIDI Sample Dump Standard transfers exist in the original software but were removed in Roger Linn's Version 3.1 software. SysEx from other instruments can be recorded into tracks (512 bytes per message in the 1988 review, under 1,000 bytes in V3.1) and is played back on the MIDI channel it was received on; the channel byte can be changed in Step Edit. No dump of the MPC60's own sequences or settings is documented.
Source: Music Technology, April 1988 review; MPC60 Software Version 3.1 Operator's Manual (Roger Linn Design), pp. 4 and 64
Specifications
- Synthesis
- Sample playback, 40 kHz, 16-bit converters with non-linear 12-bit storage
- Polyphony
- 16 voices
- Memory
- 99 sequences of 99 tracks, 20 songs; 13.1 s of sample memory (26.2 s with EXM003); storage on 3.5-inch floppy disk
- Keyboard / format
- 16 velocity- and pressure-sensitive pads
- Outputs
- Stereo out, 8 individual outputs, echo send and return
- MIDI
- 2 MIDI IN, 4 MIDI OUT
Known issues and maintenance
Memory is lost at power-off: sequences and sounds must be saved to floppy disk.
Sources
to be verifiedThese notes have not been checked against the sources yet. Corrections are welcome in the comments.
- Simon Trask, "Akai MPC60", Music Technology, April 1988 ↗ — Review: MIDI Sample Dump Standard, sample transfer with the S900, SysEx recording, specifications, price
- MPC60 Software Version 3.1 Operator's Manual for the Akai MPC60 and MPC60-II, Roger Linn and David Battino, Roger Linn Design, 2002 revision — Release year, removal of SDS in V3.1, SysEx recording, technical specifications; designer's upgrade manual, not an Akai publication
- Akai S1000 Series Software Version 2.0 Manual (Internet Archive copy) — p. 7: Akai describes the MPC-60 as a sequencer
Sign in to write a comment.
Comments
0