no image yet
Akai · Sampler · 1988

Akai S1000

The Akai S1000 is a 16-bit stereo sampler in a 3U rack, reviewed in 1988. It records at 44.1 or 22.05 kHz into 2 MB of memory, expandable to 8 MB, and plays 16 notes at a time. Samples can be trimmed, looped, crossfaded, filtered and time-stretched, and programs respond on different MIDI channels. Akai's manual presents the S900 as the previous industry standard, and the S1000 can read and convert S900 disks. Memory is not battery-backed: sounds live on floppy or hard disk. Over MIDI the S1000 sends and receives programs, samples and drum settings as System Exclusive data. Samples travel either in the MIDI Sample Dump Standard or in Akai's own S1000 format, a superset for S1000-family machines.

Sign in to upload or comment

SysEx messages

0 files

This instrument is still waiting for its first SysEx.

If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.

Upload a SysEx

SysEx guide

Manufacturer ID
47
Model ID
48

Receiving a dump

No setting is needed: there is no receive key, and reception starts automatically when the other device starts the dump. Set the same System Exclusive channel on both machines.

Sending a dump from the instrument

1. Connect MIDI OUT and MIDI IN in both directions (a MIDI loop). 2. In MIDI mode, open the MIDI data dumps page. 3. Set the channel (a logical System Exclusive channel, not a MIDI channel) to match the receiver. 4. Choose the type: ALL PROGRAMS, ALL SAMPLES, SINGLE PROGRAM, SINGLE SAMPLE or DRUM SETTINGS, and the program or sample if single. 5. Choose the protocol: STANDARD (MIDI Sample Dump Standard) or S1000 (only between S1000-family machines). 6. Press SEND; ABORT stops the transfer.

SysEx pitfalls

Sample dumps use a handshake with error detection, so a two-way MIDI connection is required. Samples of lower resolution are padded to 16 bits; samples sent to a lower-resolution sampler lose their low bits. The S1000 protocol works only between the S1000, S1000KB, S1000HD and S1000PB. Byte formats are not in the manual, which refers to the Akai dealer.

Source: Akai S1000 Series Software Version 2.0 Manual (89/11), pp. 66-67 and MIDI implementation chart p. 81

Specifications

Synthesis
16-bit linear sampling at 44.1 or 22.05 kHz, digital low-pass filter and two ADSR envelopes
Polyphony
16 notes
Multitimbrality
Multitimbral over MIDI channels 1-16
Filter
Digital low-pass filter, -18 dB/octave
Memory
Up to 200 samples and 100 programs in RAM (400 samples, programs and keygroups combined); 2 MB RAM, expandable to 8 MB
Keyboard / format
3U rack module
Outputs
Stereo out (XLR), 8 assignable outputs, effect send and stereo return, headphones
MIDI
IN, OUT, THRU

Known issues and maintenance

Sample memory is not battery-backed: samples and programs are lost at power-off and must be saved to floppy or hard disk.

Sources

to be verified

These notes have not been checked against the sources yet. Corrections are welcome in the comments.

  1. Akai S1000 Series Software Version 2.0 Manual (S1000, S1000HD, S1000PB), 89/11 (Internet Archive copy) — Features, MIDI data dumps and sample dump protocols, MIDI chart with Akai and S1000 IDs, technical specifications
  2. Simon Trask, "Akai S1000", Music Technology, October 1988 ↗ — Review: UK price, SysEx dumps from the front panel received automatically, Sample Dump Standard or S1000 format

Comments

0

Sign in to write a comment.

An unhandled error has occurred. Reload 🗙

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.