Alesis Q20
The Alesis Q20 is a one-unit rack multi-effects processor that Sound On Sound described in December 1998 as essentially a Q2 with 20-bit converters, twice the user memory, an internal power supply and more connections. Programs are built from blocks of equalisation, pitch effects, delays and fourteen reverb types; the delay section adds tap tempo and sampling. The user bank holds 200 programs, numbered 0-00 to 1-99, next to a preset bank. The audio connections are stereo analog inputs on combination XLR and jack sockets, outputs on XLR and jack, ADAT optical and S/PDIF digital I/O and a 48 kHz word clock input. Footswitch jacks cover program advance, bypass and tap tempo, and up to eight parameters per program can be modulated in real time over MIDI. From MIDI Page 6 the Q20 sends one user program, the edit buffer or the whole user bank as System Exclusive data, and a single program can be given a different destination number. Dumps sent back to the unit are received automatically when System Exclusive Receive on MIDI Page 5 is on.
SysEx messages
0 filesThis instrument is still waiting for its first SysEx.
If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.
Upload a SysExSysEx guide
- Manufacturer ID
- 00 00 0E
Receiving a dump
1. Press MIDI and go to MIDI Page 5. 2. Set System Exclusive Receive to ON. 3. Send the dump: the Q20 enters receive mode automatically.
Sending a dump from the instrument
1. Connect the Q20 MIDI Out to the receiver's MIDI In and set the receiver to record. 2. Press MIDI, then PAGE< to reach MIDI Page 6: SEND MIDI PROGRAM. 3. With VALUE/ENTER choose a User program 0-00 to 1-99, EDIT for the edit buffer, or turn fully right for ALL. 4. For a single program, press PAGE> and choose the destination. 5. Press VALUE/ENTER. ALL shows MIDI PROGRAM DUMP IN PROGRESS.
SysEx pitfalls
The MIDI Page 5 illustration shows System Exclusive Receive OFF; check it before loading a dump.
Source: Alesis Q20 Reference Manual, ch.5 MIDI (printed p.77), ch.6 Sysex Storage (printed pp.89-90)
Specifications
- Memory
- 200 user programs (0-00 to 1-99) plus a preset bank
- Keyboard / format
- 1U rack unit
- Outputs
- Stereo in (XLR/jack combo), stereo out on XLR and 1/4 inch; ADAT optical and S/PDIF; 48 kHz word clock in
- MIDI
- MIDI In, MIDI Thru/Out
Known issues and maintenance
Re-initialise: hold PROGRAM and COMPARE while switching on; Global parameters and the edit buffer are reset, programs are kept. Total reset: hold PROGRAM, COMPARE and BLOCK< while switching on; this erases all User programs.
Sources
to be verifiedThese notes have not been checked against the sources yet. Corrections are welcome in the comments.
- Alesis Q20 Reference Manual (ManualsLib copy) — Contents, MIDI pages, Sysex Storage, user program numbering, troubleshooting and resets
- Paul White, Alesis Q20, Sound On Sound, December 1998 ↗ — Relation to the Q2, converters, sample rate, programs, I/O, size, power
Sign in to write a comment.
Comments
0