no image yet
ASM · Synthesizer

ASM Hydrasynth

The ASM Hydrasynth is an eight-voice polyphonic synthesizer from Ashun Sound Machines, with a 49-key keyboard that responds to velocity and polyphonic aftertouch and a ribbon controller that can bend pitch, play like a theremin or add modulation. Each voice has three oscillators: all three can produce analog-modelled waveforms, and the first two add WaveScan synthesis, sweeping through hundreds of waveforms that can be morphed, mutated and warped. Two filters follow, the first with 16 types including vocal formants, the second a 12 dB per octave state-variable design, then loopable envelopes, a 32-route modulation matrix, eight Macros per patch and delay, reverb and pre and post effects. The memory holds eight banks of 128 patches. Besides MIDI In, Out and Thru and class-compliant USB, the Hydrasynth has CV and gate inputs and outputs for modular systems, and two units can be linked over MIDI for 16 voices. Sound On Sound reviewed it in May 2020 after a preview at SynthFest 2019 and called it a seriously impressive first instrument. From its MIDI settings page the Hydrasynth sends System Exclusive data of the current patch or of all patches and banks, over 5-pin MIDI or USB. ASM also offers a free librarian, ASM Manager, for moving single patches, banks or the whole memory, and microtonal scales travel as sys-ex too.

SysEx messages

0 files

This instrument is still waiting for its first SysEx.

If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.

Upload a SysEx

SysEx guide

Receiving a dump

The manual gives no reception procedure. It warns that a patch received via sys-ex overwrites the current patch location, so select a free location first, and switch Memory Protect off (System Setup page 1, knob 4).

Sending a dump from the instrument

1. Press SYSTEM SETUP and page down to MIDI Page 6. 2. Press Control button 3 (Send Patch) to send the current patch, or Control button 4 (Send All Patches) to send all patches and banks. The data goes out via 5-pin MIDI or USB.

SysEx pitfalls

One patch can be sent to any Hydrasynth; a full dump can go to any Hydrasynth except a Deluxe. ASM recommends its free ASM Manager for backing up single patches, banks or the whole memory.

Source: ASM, Hydrasynth Keyboard & Desktop Owner's Manual 2.2.0, p. 94-96, 100-103 ↗

Specifications

Synthesis
WaveScan synthesis and analog modelling
Polyphony
8 voices; 16 with two units linked in Overflow mode
Oscillators
3 per voice: analog modelling on all three, WaveScan on Osc 1 and 2, hundreds of waveforms with mutators
Filter
Filter 1 with 16 types incl. vocal formant; Filter 2 state-variable 12 dB/oct; series or parallel
Memory
8 banks of 128 patches (A-H); 32 Favorites
Keyboard / format
49 keys, velocity and polyphonic aftertouch; ribbon controller
Outputs
Stereo 1/4 inch balanced; two headphone jacks (6.35 and 3.5 mm); 5 CV/Gate/Clock outputs
MIDI
MIDI In, Out, Thru (5-pin DIN); USB type B, class compliant

Known issues and maintenance

Memory Protect is on by default (System Setup page 1, knob 4) and must be switched off before a patch can be saved; the setting is kept at power-off.

Sources

to be verified

These notes have not been checked against the sources yet. Corrections are welcome in the comments.

  1. ASM, Hydrasynth Keyboard & Desktop Owner's Manual, version 2.2.0 ↗ — Features p. 10-11, patch protection and backup p. 94-95, scales sys-ex p. 98-99, MIDI pages p. 100-103 (Send Patch, Overflow), specifications p. 120
  2. ASM downloads page ↗ — Links the owner's manuals, factory patch listings and ASM Manager
  3. Paul Nagle, ASM Hydrasynth, Sound On Sound, May 2020 ↗ — SynthFest 2019 preview, keyboard and desktop released together, verdict

Comments

0

Sign in to write a comment.

An unhandled error has occurred. Reload 🗙

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.