no image yet
Behringer · Controller

Behringer BCR2000

The Behringer B-Control Rotary BCR2000 is a USB and MIDI control surface with 32 rotary encoders, each surrounded by a ring of LEDs that shows its value. Eight push encoders in the top row can be switched across four encoder groups, giving 64 functions per preset, and 24 further encoders sit below them, with assignable keys, system keys and a four-digit LED display. The unit stores 32 presets. It works with a computer as a class-compliant USB MIDI device, where it can also act as a MIDI interface, or stand-alone through its MIDI In, Out A and Out B/Thru sockets, in four USB and four stand-alone operating modes. Two footswitch inputs, a Learn mode and parameter feedback complete it. Sound On Sound found it great value in 2005, while warning that the encoders could break if pressed too hard. Behringer now lists it as a legacy product. The BCR2000 sends its presets as System Exclusive dumps, either the current preset with all its control assignments or the whole memory of 32 presets. Dumps are tied to a device ID from 1 to 16, so several units can share one MIDI setup.

Sign in to upload or comment

SysEx messages

0 files

This instrument is still waiting for its first SysEx.

If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.

Upload a SysEx

SysEx guide

Manufacturer ID
00 20 32

Receiving a dump

No settings are needed to receive a dump, but the device ID (global setup, push encoder 5, 1 to 16) must match the one the dump was sent with. A single preset goes to a temporary memory: press STORE and choose a preset slot to keep it. An All dump overwrites the whole memory at once.

Sending a dump from the instrument

1. Hold EDIT and press STORE to open the global setup menu. 2. Turn push encoder 6 to Single (current preset) or All (all 32 presets). 3. Press encoder 6 once to start the dump; EXIT cancels it. Shortcut: hold EDIT and press PRESET right to send the whole current preset.

SysEx pitfalls

An All dump sent to the unit overwrites its entire memory without confirmation or safety copy. Dumps are received only at the device ID they were sent to. MIDI Data Interval (global setup, encoder 8, in milliseconds) sets the transmission rate of SysEx dumps.

Source: Behringer, B-Control Fader BCF2000 / Rotary BCR2000 User Manual (EN), p. 6, 18-19 ↗

Specifications

Memory
32 presets
Keyboard / format
Desktop controller: 8 push encoders and 24 encoders with LED rings, 20 keys and 10 system keys, 4-digit LED display
MIDI
MIDI In, Out A, Out B/Thru (5-pin DIN); USB MIDI, class compliant

Known issues and maintenance

Encoders. A 2005 reviewer warned that the encoders may break if pressed too hard. Panic Reset: hold EDIT and press EXIT to return the most important MIDI data to factory settings.

Sources

to be verified

These notes have not been checked against the sources yet. Corrections are welcome in the comments.

  1. Behringer, B-Control Fader BCF2000 / Rotary BCR2000 User Manual (English) ↗ — SysEx dumps, device ID and data interval p. 18-19, controls p. 6-8, operating modes, specifications p. 22
  2. Behringer product page BCR2000 (0808-AAA) ↗ — Legacy status, manuals, BC-Edit and update utility downloads
  3. Derek Johnson, Behringer BCF2000 & BCR2000, Sound On Sound, January 2005 ↗ — Encoder durability, BC Edit editor, price, verdict

Comments

0

Sign in to write a comment.

An unhandled error has occurred. Reload 🗙

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.