Boss DR-670
The BOSS DR-670 Dr. Rhythm is a compact, battery-powered drum machine from 2001 that plays a bass part alongside the drums. It has 256 drum sounds and 16 bass sounds with 20-voice polyphony, played from 16 dynamics-sensitive key pads plus dedicated roll and flam pads. It holds 64 preset and 64 user drum kits, 200 preset and 200 user patterns at 96 steps per quarter note, and 100 songs of up to 250 patterns, with about 8,000 notes of storage. It has stereo outputs, a headphone jack, a jack for two foot switches and MIDI In and Out, with separate MIDI channels for the drum and bass parts. Direct Pattern Play starts patterns from the pads. The DR-670 saves its memory as Roland-format System Exclusive. From the MIDI mode TX BULK screen it sends everything, the user patterns and songs, the utility and MIDI settings, or all user kits; it receives dumps only while the RX BULK screen is shown.
SysEx messages
0 filesThis instrument is still waiting for its first SysEx.
If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.
Upload a SysExSysEx guide
- Manufacturer ID
- 41
- Model ID
- 00 41
- Default device ID
- DEV ID 17 (device ID byte 10H); range 17-32 = 10H-1FH
Receiving a dump
1. Connect the sender's MIDI OUT to the DR-670 MIDI IN. 2. Set DEV ID in MIDI mode to the value used when the data was sent. 3. In MIDI mode select RX BULK with the cursor buttons. 4. Send the data; the REC indicator lights while it is received and goes out when done.
Sending a dump from the instrument
1. Connect the DR-670 MIDI OUT to the receiver's MIDI IN. 2. In MIDI mode select TX BULK with the cursor buttons. 3. With the TEMPO/VALUE dial choose ALL, SEQ (user patterns and songs), UTIL (Utility, MIDI and DPP assign settings) or KIT (all user kits). 4. Press START; the tempo indicator lights during the dump. STOP/CONT cancels.
Requesting a dump
The MIDI Implementation lists RQ1 (11H) with the block start addresses 10, 20, 30 and 40 00 00 00 00; the size value is free. Exclusive is received only at the RX BULK screen.
SysEx pitfalls
Roland format F0 41 dev 00 41 cmd with a five-byte address and five-byte size, then checksum. Blocks: songs 10 00 00 00 00, user patterns 20 00 00 00 00, user kits 30 00 00 00 00, settings 40 00 00 00 00, bulk control 70 00 00 00 00. A dump of ALL may overflow the receiver: send SEQ, UTIL and KIT separately.
Specifications
- Synthesis
- PCM drum and bass sounds (256 drum, 16 bass)
- Polyphony
- 20 voices (may be lower depending on instruments and kits)
- Multitimbrality
- Two parts: drums and bass, each on its own MIDI channel
- Memory
- 128 drum kits (64 preset + 64 user); 400 patterns (200 preset + 200 user); 100 songs, up to 250 patterns each; about 8,000 notes
- Keyboard / format
- Tabletop unit with 16 dynamics-sensitive key pads plus ROLL and FLAM pads
- Outputs
- Output L (mono) / R, headphones
- MIDI
- MIDI In, MIDI Out
Known issues and maintenance
An internal battery keeps the memory; the display shows BAK BATTERY LOW when it must be replaced by a Roland service centre (owner's manual p. 11). Factory Reset erases all data, so the manual advises a bulk dump first (p. 19).
Sources
to be verifiedThese notes have not been checked against the sources yet. Corrections are welcome in the comments.
- BOSS DR-670 MIDI Implementation, version 1.00, May 18, 2001 ↗ — Model ID 00H 41H, device ID 10H-1FH, RQ1/DT1 with five-byte address and size, parameter base addresses, Identity Reply
- BOSS DR-670 Dr. Rhythm Owner's Manual (2001) ↗ — Features p. 4, panels p. 13, kits pp. 36 and 42, polyphony p. 43, Bulk Dump and Bulk Load pp. 89-90, parameter list with factory DEV ID 17 p. 98, MIDI chart p. 112, specifications p. 114
- BOSS DR-670 product page ↗ — Kits, patterns, songs, connectors, discontinued
Sign in to write a comment.
Comments
0