Boss DR-880
The BOSS DR-880 Dr. Rhythm is a drum machine from 2004 with 440 drum and percussion sounds and 40 bass sounds, 32-voice polyphony and 20 velocity-sensitive pads. The drum part has three insert effects, the bass part a compressor and COSM amp model, and a TSC section adds overall EQ and reverb. It stores 100 preset and 100 user kits, 500 preset and 500 user patterns and 100 songs, with EZ Compose and Groove Modify tools for building patterns. A front guitar/bass input with its own COSM multi-effects makes it a practice and recording partner for players. Outputs include master jacks and phono sockets, two individual outputs and a coaxial digital out; it has MIDI In and Out, four control inputs and USB for SMF import, file backup and MIDI. Over MIDI the DR-880 sends Roland-format System Exclusive bulk dumps of everything or of one block: patterns and songs, kits, TSC patches, guitar effect patches or system settings. It accepts dumps and data requests only while its Bulk Load screen is open.
SysEx messages
0 filesThis instrument is still waiting for its first SysEx.
If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.
Upload a SysExSysEx guide
- Manufacturer ID
- 41
- Model ID
- 00 00 02
- Default device ID
- Device ID 17 (byte 10H); range 17-32 = 10H-1FH
Receiving a dump
1. With playback stopped press EDIT. 2. Select the MIDI icon and press ENTER. 3. Select the B. LOAD icon and press ENTER (bulk load standby). 4. Send the data from the connected device; the display shows Now receiving. 5. Press EXIT to finish. The Device ID must match the one used when the data was sent.
Sending a dump from the instrument
1. With playback stopped press EDIT. 2. Select the MIDI icon and press ENTER. 3. Select the B. DUMP icon and press ENTER. 4. With the VALUE dial choose ALL, PTN/SONG, KIT, TSC, GUITAR FX or SYSTEM. 5. Press ENTER; the display shows Now dumping. EXIT aborts.
Requesting a dump
RQ1 (11H) to a block start address (10, 20, 30, 40 or 50 00 00 00 00) is recognized only while the BULK LOAD screen is shown; size and checksum are ignored.
SysEx pitfalls
Roland format F0 41 dev 00 00 02 cmd with a five-byte address, then checksum. A dump is framed by bulk start (70 00 00 00 00) and bulk end (70 00 00 00 01). A dump of ALL may fill the receiver's memory; send single blocks instead. User data can also be backed up as files over USB.
Specifications
- Synthesis
- PCM drum and bass sounds (440 drum, 40 bass) with COSM bass amp and insert effects
- Polyphony
- 32 voices (may be lower depending on the bass tone)
- Multitimbrality
- Two parts: drums and bass, each on its own MIDI channel
- Memory
- 200 kits (100 preset + 100 user); 1,000 patterns (500 preset + 500 user); 100 user songs; 20 user TSC and 50 user guitar effect patches; about 30,000 notes
- Keyboard / format
- Tabletop unit with 20 velocity-sensitive pads
- Outputs
- Master Out L (mono)/R jacks, Master Out L/R phono, Individual A and B, coaxial digital out, headphones
- MIDI
- MIDI In, MIDI Out; USB (MIDI and storage)
Sources
to be verifiedThese notes have not been checked against the sources yet. Corrections are welcome in the comments.
- BOSS DR-880 MIDI Implementation, version 1.00, Feb 1, 2005 ↗ — Model ID 00H 00H 02H, device ID 10H-1FH, RQ1 and DT1 only at the Bulk Load screen, parameter base addresses
- BOSS DR-880 Dr. Rhythm Owner's Manual (2004) ↗ — Features pp. 11-12, Device ID, Bulk Dump and Bulk Load pp. 131-132, USB backup p. 138, parameter list with factory values p. 150, MIDI chart p. 160, specifications p. 162
- BOSS DR-880 product page ↗ — Sounds, kits, patterns, effects, connectors, discontinued
Sign in to write a comment.
Comments
0