Boss VF-1

Photo: Kyle Macquarrie from Glasgow, Scotland · CC BY-SA 2.0 ↗

Boss · Effect Processor · 1999

Boss VF-1

The BOSS VF-1 is a 24-bit stereo multi-effects processor from 1999 in a half-rack case. It offers 46 effects arranged in 36 algorithms, from COSM guitar preamp and speaker simulation to bass, acoustic guitar, vocal, microphone and keyboard processing, plus reverb, delay, chorus and mastering-style tools. It stores 200 preset and 200 user patches. A front Hi-Z guitar input sits beside the stereo line inputs, and the outputs include a coaxial digital out. Patches change by MIDI program change and bank select, and many parameters follow MIDI controllers, a foot switch or an expression pedal. Sound On Sound saw it mainly as a recording preamp for guitar and found it good value. The VF-1 sends and receives Roland-format System Exclusive. A bulk dump from the Utility menu sends all data, the utility settings, all user patches or the patch being edited, and the same menu puts the unit in Bulk Load mode to take the data back.

SysEx messages

0 files

This instrument is still waiting for its first SysEx.

If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.

Upload a SysEx

SysEx guide

Manufacturer ID
41
Model ID
00 23
Default device ID
DEV. ID 1 (byte 00H); range 1-32 = 00H-1FH

Receiving a dump

1. Set DEV. ID to the value used when the data was sent. 2. Press UTILITY, turn NUMBER to MIDI and press ENTER. 3. With PARAMETER select MIDI BULK LOAD (NOW WAITING appears). 4. Send the data; NOW RECEIVING then Complete! appear. 5. Press UTILITY to return to Play mode.

Sending a dump from the instrument

1. Press UTILITY, turn NUMBER to MIDI and press ENTER. 2. With PARAMETER select MIDI BULK DUMP. 3. With VALUE choose ALL (utility and patches), UTILITY, PATCH (all user patches) or TEMP (patch being edited). 4. Press ENTER; Bulk Dump then Complete! appear. 5. Press UTILITY to return to Play mode.

Requesting a dump

The VF-1 accepts RQ1 (11H) but never sends it; data requests are received only while Bulk Load is ready in Utility mode.

SysEx pitfalls

Roland format F0 41 dev 00 23 cmd with a three-byte address and size, then checksum. Data values are sent as 4-bit nibbles. User patches start at 00 00 00 (bank A) and 04 00 00 (bank B), one every 00 04 00; Utility at 08 00 00. Patches sent as individual data are stored only after a Patch Write Request to 70 00 00. Only data with the same Device ID is received, and front panel controls are ignored during a dump.

Source: BOSS VF-1 Owner's Manual pp. 122-126 and VF-1 MIDI Implementation v1.10 (Apr. 17, 2000), sections 2-4 ↗

Specifications

Memory
400 patches: 200 user + 200 preset
Keyboard / format
Half-rack unit (218 x 248 x 44 mm); 19-inch mounting with the RAD-50 adaptor
Outputs
Output L (mono)/R, coaxial digital output (S/P DIF)
MIDI
MIDI In, MIDI Out

Sources

to be verified

These notes have not been checked against the sources yet. Corrections are welcome in the comments.

  1. BOSS VF-1 MIDI Implementation, version 1.10, Apr. 17, 2000 ↗ — Model ID 00H 23H, device ID 00H-1FH, RQ1 receive only, nibblized data, address map with user patches, utility, temporary area, SCR and PWR
  2. BOSS VF-1 Owner's Manual (1999), scanned PDF read as page images ↗ — Features p. 9, backup advice p. 11, MIDI settings and factory Device ID pp. 122-123, Bulk Dump p. 125, Bulk Load p. 126, MIDI chart p. 136, specifications p. 137
  3. BOSS VF-1 product page ↗ — Description, specifications, discontinued
  4. John Walden, Boss VF1, Sound On Sound, December 2000 ↗ — Half-rack format, patch banks, algorithms, verdict

Comments

0

Sign in to write a comment.

An unhandled error has occurred. Reload 🗙

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.