no image yet
Casio · Sound Module

Casio VZ-8M

The Casio VZ-8M is a digital synthesizer module in Casio's VZ series, alongside the VZ-1 keyboard and the VZ-10M module. Each voice is built from eight modules, each an oscillator with its own amplifier, which can be mixed, ring-modulated or phase-modulated in pairs, with eight waveforms to choose from. It holds 128 preset and 64 internal voices and the same number of operation memories, which store performance settings. ROM cards add 128 voices and 128 operation memories, and the RA-500 RAM card holds 64 of each. A memory protect setting for internal memory and cards switches back on at every power-on. The VZ-8M saves and loads its data over MIDI as System Exclusive. From the SAVE/LOAD function it can send or receive the 64 internal voices, the 64 operation memories, both together, or everything including global settings. Single voices and operation memories can also be requested by a computer. Casio states that voice data is fully compatible with the VZ-1 and VZ-10M, while operation memories are compatible only within the functions those models share.

SysEx messages

0 files

This instrument is still waiting for its first SysEx.

If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.

Upload a SysEx

SysEx guide

Manufacturer ID
44
Default device ID
Basic MIDI channel (N = channel - 1)

Receiving a dump

1. In TOTAL CONTROL, turn MIDI Exclusive on (TOTAL-04). 2. Turn memory protect off (TOTAL-02); it returns to ON at every power-on. 3. Make sure the basic channel matches the sending device.

Sending a dump from the instrument

1. Select the SAVE/LOAD function and set it to SAVE. 2. Set CARD/MIDI to MIDI. 3. Set DATA to VOICE, OP MEM, VC+OP or FULL. 4. Press YES, then YES again when the display shows EXECUTE?. 5. When two VZ units are connected, set the receiving unit to LOAD with the same DATA setting.

Requesting a dump

The manual documents send requests for single voice data and single operation data (pp. 120-121); the byte layout is garbled in the copy read.

SysEx pitfalls

MIDI SAVE/LOAD fails if MIDI Exclusive is off or the basic channels differ. Errors show a transmission error and CHECK SYSTEM!; press MODE, PAGE or CURSOR to clear. Voice data is compatible with the VZ-1 and VZ-10M; never send operation memory received by a VZ-1 back to a VZ-10M.

Source: Casio VZ-8M Operation Manual, pp. 70-72 and 117-122

Specifications

Synthesis
Digital, 8 modules (oscillator and amplifier) per voice with mix, ring and phase line modes
Oscillators
8 modules (DCO and DCA) per voice, 8 waveforms
Memory
128 preset and 64 internal voices; 128 preset and 64 internal operation memories; ROM and RA-500 RAM cards

Known issues and maintenance

Memory protect (internal and card) is set to ON at every power-on; with it ON, data cannot be loaded.

Sources

to be verified

These notes have not been checked against the sources yet. Corrections are welcome in the comments.

  1. Casio, VZ-8M Operation Manual (third-party copy on ManualsLib) — Voice structure, memory, cards, memory protect, SAVE/LOAD over MIDI, System Exclusive formats, compatibility with VZ-1 and VZ-10M. Third-party OCR copy of the manufacturer document

Comments

0

Sign in to write a comment.

An unhandled error has occurred. Reload 🗙

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.