Casio XW-P1
The Casio XW-P1 is a 61-key performance synthesizer reviewed in 2012. It brings several sound engines together: a Solo Synth section with six blocks (two virtual analogue oscillators, two PCM oscillators, an external input and noise), a Hex Layer mode that stacks six layers in one tone, a Drawbar Organ section and a library of PCM melody and drum tones. It plays up to 64 notes, receives on 16 MIDI parts and adds a step sequencer, an arpeggiator, a phrase recorder and an SD card slot. The front panel has sliders and knobs for live control, and the instrument has MIDI In and Out as well as a USB port that appears to a computer as a MIDI device. It can run on batteries. The XW-P1 exchanges its user data as System Exclusive. Casio's MIDI Implementation describes bulk transfer of parameter sets such as patches, tones, Solo Synth, Hex Layer and Drawbar tones, step sequences, arpeggios and phrases, in a one-way mode or a handshake mode, with CRC32 checking. Individual parameters can also be requested and sent. Casio's Data Editor application uses this route to save user data on a computer.
SysEx messages
0 filesThis instrument is still waiting for its first SysEx.
If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.
Upload a SysExSysEx guide
- Manufacturer ID
- 44
- Model ID
- 16 03
- Suggested delay between messages
- 20 ms
Requesting a dump
Bulk transfers are requested by the computer with an OBR (02H, one-way) or HBR (04H, handshake) message naming the category, memory and parameter set number; the instrument answers with OBS (03H) or HBS (05H). Single parameters are requested with IPR (00H) and returned with IPS (01H). Casio's Data Editor for XW-P1 performs these transfers.
SysEx pitfalls
Header F0 44 16 03, then device ID (00-7F, 7F always accepted). Data blocks carry a CRC32. In one-way receive the default minimum interval between packets is 20 ms and the default packet size 128 bytes. No MIDI messages are handled while Please Wait is shown. Drawbar and Hex Layer categories exist only on the XW-P1.
Source: Casio XW-P1/XW-G1 MIDI Implementation, pp. 9, 44-52, 64, 85
Specifications
- Synthesis
- PCM tones with virtual analogue Solo Synth, Hex Layer and drawbar organ sections
- Polyphony
- 64 notes (1 to 32 for some tones)
- Multitimbrality
- 16 parts via MIDI, GM Level 1
- Oscillators
- Solo Synth: two virtual analogue and two PCM oscillators, external input and noise per tone
- Filter
- Each Solo Synth block has its own filter; each Hex Layer layer has its own filter
- Memory
- 620 preset and 310 user tones; 100 preset and 100 user performances
- Keyboard / format
- 61 standard-size keys, touch response (2 types and off)
- Outputs
- Line Out R and L/MONO, headphones; inputs: Audio In, Inst In, Mic In
- MIDI
- MIDI In, Out; USB (type B) MIDI to a computer
Sources
to be verifiedThese notes have not been checked against the sources yet. Corrections are welcome in the comments.
- Casio, XW-P1/XW-G1 MIDI Implementation (third-party copy on ManualsLib) — Model ID, device ID, action and category codes, bulk dump modes, CRC32, timing parameters. Third-party copy of the manufacturer document
- Casio, XW-P1 User's Guide XWP1-E-1B (third-party copy on ManualsLib) — Specifications, connections, USB MIDI, Data Editor. Third-party copy of the manufacturer document
- Casio support, Data Editor for XW-P1 ↗ — PC application to store user data on a computer
- Future Music, Casio XW-P1 synthesizer review, MusicRadar, 14 December 2012 ↗ — Date, price, Solo Synth, Hex Layer and Drawbar sections
Sign in to write a comment.
Comments
0