no image yet
Clavia · Synthesizer · 1995

Clavia Nord Lead

The Clavia Nord Lead is a four-octave digital synthesizer from Sweden, released in 1995 and listed by Nord as in production until 1997. Its manual calls it a "virtual analog" synthesizer: a digital instrument that imitates the behaviour of analogue subtractive synthesizers. Each voice has two oscillators with hard sync and FM, a multimode filter, two LFOs, an arpeggiator and envelopes, and almost every parameter has its own knob or button on the front panel. The basic instrument plays four voices, twelve with the eight-voice expansion board, across four program slots that can be layered or played on separate MIDI channels. A keyboardless version, the Nord Rack, shares the same manual. Sound On Sound reviewed it in May 1995, and Gordon Reid summed it up as "essentially the monosynth for the digital age". Nord's own history credits it with starting the virtual analogue wave of the 1990s, and it was the first instrument with the wooden Nord pitch stick. Software version 2 added percussion kits, factory performances and a further filter mode. The Nord Lead sends and receives its sounds as System Exclusive data. Shift + Dump One sends the current program, percussion kit or performance, and Shift + Dump All sends the whole bank. A program travels as one message with 132 data bytes, a percussion kit with 1,056 and a performance with 688. A single sound arrives in the edit buffer of a slot and must be stored to be kept; a complete bank replaces the bank selected on the instrument.

Sign in to upload or comment

SysEx messages

0 files

This instrument is still waiting for its first SysEx.

If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.

Upload a SysEx

SysEx guide

Manufacturer ID
33
Model ID
04
Default device ID
Same as the Global MIDI Channel (sent as 0-15)

Receiving a dump

The manual describes no receive switch. 1. Connect the sender's MIDI Out to the Nord Lead's MIDI In. 2. To receive a complete bank, scroll to a program number in the bank you want to replace. To receive a percussion kit, first select a percussion kit (P0-P9) in the receiving slot. 3. Start the transmission on the sending device. A single program or performance arrives in the edit buffer of the slot: press Store, choose a location and press Store again to keep it.

Sending a dump from the instrument

1. Connect the Nord Lead's MIDI Out to the receiver's MIDI In and prepare the receiver to record System Exclusive data. 2. To send performances, enter Performance mode. To send programs or percussion kits, make sure Performance mode is off. 3. To send a single program, kit or performance, select it. 4. Hold Shift and press Dump One (the Oct Shift + button) to send the current sound, or Dump All (the Oct Shift - button) to send all programs or performances.

Requesting a dump

Patch dump request: F0 33, device ID, 04, message type, message specification, F7. Type 0A asks for the edit buffer of a slot (specification 00-03 = slots A-D); types 0B-0E ask for banks 1-4 (specification = program location). The Nord Lead answers with one patch or percussion kit dump. A performance dump request uses type 28 hex (edit buffer, specification 00) or 29 hex (card bank, performance 00-63 hex). Type 14 hex asks for all controller values of a slot (00-03). The Nord Lead never sends these requests itself.

SysEx pitfalls

Sizes. A program dump carries 132 data bytes, a percussion kit dump 1,056 and a performance dump 688, each after a six-byte header and before F7. Percussion kits. Start the dump in Program mode: from Performance mode only a reference to the kit is sent. Kit data sent to a slot that plays a normal program is ignored, and program data is not accepted by a slot that plays a kit. The internal kit locations cannot be overwritten. Banks. After Dump All each program returns to its original number, but in the bank currently selected on the instrument.

Source: Clavia Nord Lead Owner's Manual, Software Version 2.x (1996), printed pp. 32, 71 and 91-95 ↗

Specifications

Produced
1995–1997
Synthesis
Virtual analogue: digital emulation of analogue subtractive synthesis
Polyphony
4 voices; 12 voices with the 8-voice expansion board
Multitimbrality
4 parts (program slots A-D, each with its own MIDI channel)
Oscillators
2 per voice. Osc 1: triangle, sawtooth or pulse with adjustable width. Osc 2: the same plus noise with a colour control. Hard sync of Osc 2 to Osc 1 and linear FM of Osc 1 from Osc 2
Filter
Multimode: 12 dB low-pass, 24 dB low-pass, band-pass or high-pass, with resonance, ADSR envelope and keyboard tracking. Software 2.0 adds a notch + low-pass mode
Memory
99 programs (40 user, 59 factory), 10 percussion kits and 100 factory performances. With the expansion board and a PCMCIA RAM card: 297 more programs in three banks and 30 percussion kit locations
Keyboard / format
4 octaves, velocity sensitive, no aftertouch; wooden pitch stick and modulation wheel. Also sold without keyboard as the Nord Rack
Outputs
Left and right line outputs, stereo headphone output
MIDI
MIDI In and MIDI Out

Known issues and maintenance

Memory. Only programs 01-40 can be overwritten in the internal memory. Saving performances or edited percussion kits needs the 8-voice expansion board and a battery-backed PCMCIA S-RAM card. The 40 factory programs in RAM are also kept as ROM performances L0-L9 and can be extracted from there. Operating system. Nord lists v2.70 (2002) as the final version; it was supplied as a replacement chip, which Nord reports as out of stock. Cards. A card formatted with software older than 2.x must be updated (display flashes UP, press Store) before it can hold the newer parameters.

Sources

to be verified

These notes have not been checked against the sources yet. Corrections are welcome in the comments.

  1. Clavia Nord Lead Owner's Manual, Software Version 2.x (Clavia DMI AB, 1996) ↗ — Program memory, PCMCIA cards, percussion kits, performances, bulk dump procedure and the System Exclusive implementation. Text read from the page-by-page copy on manualslib.com (manual 1056845)
  2. Nord: Nord Lead (legacy product), overview and specifications ↗ — Production years 1995-1997, voices, oscillators, filter, memory, outputs, SysEx bulk dumps, dimensions and weight
  3. Nord: Nord Lead downloads ↗ — Final operating system v2.70, manual, factory banks and sound cards as SysEx files
  4. Nord: About us ↗ — Company founded in 1983 by Hans Nordelius; Nord Lead released in 1995
  5. Gordon Reid, "Clavia Nord Lead", Sound On Sound, May 1995 ↗ — Contemporary review: Swedish maker, prices, keyboard without aftertouch, two audio outputs, criticisms and verdict
  6. Gordon Reid, "Clavia Nord Lead 2.0", Sound On Sound, December 1996 ↗ — What software version 2 adds: percussion kits, 100 ROM performances, notch + low-pass filter mode, aftertouch reception
  7. MIDI Association: Assigned Manufacturer MIDI SysEx ID Numbers ↗ — Row 33H, Clavia Digital Instruments

Comments

0

Sign in to write a comment.

An unhandled error has occurred. Reload 🗙

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.