Clavia Nord Lead 2
The Clavia Nord Lead 2 is a four-octave virtual analogue synthesizer, made from 1997 to 2003 as the successor of the original Nord Lead. It plays 16 voices across four program slots that can be layered or driven on separate MIDI channels, and each slot has its own audio output. Each voice has two oscillators with sync and FM, a multimode filter with distortion, two LFOs and an arpeggiator, nearly all with their own knob. The Nord Lead 2 sends programs, percussion kits and performances as System Exclusive data: Shift + Dump One sends the current sound, Shift + Dump All the whole bank. A program travels as one message with 132 data bytes. A single sound arrives in the edit buffer and must be stored; a full bank replaces the bank selected on the instrument.
Sign in to upload or commentSysEx messages
0 filesThis instrument is still waiting for its first SysEx.
If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.
Upload a SysExSysEx guide
- Manufacturer ID
- 33
- Model ID
- 04
- Default device ID
- Same as the Global MIDI Channel (sent as 0-15)
Receiving a dump
The manual describes no receive switch. 1. Connect the sender's MIDI Out to the Nord Lead 2's MIDI In. 2. To receive a complete bank, scroll to a program number in the bank (program or performance bank) you want to replace. To receive a percussion kit, first select a percussion kit in the receiving slot. 3. Start the transmission on the sending device. A single program or performance arrives in the edit buffer of the active slot: use Store to keep it.
Sending a dump from the instrument
1. Connect the Nord Lead 2's MIDI Out to the receiver's MIDI In and set the receiver to accept System Exclusive data. 2. To send performances, enter Performance mode. To send programs or percussion kits, make sure Performance mode is off. 3. To send one program or performance, select it. 4. Hold Shift and press Dump One (the Oct Shift + button) to send the current sound, or Dump All (the Oct Shift - button) to send all programs or performances.
Requesting a dump
Patch dump request: F0 33, device ID, 04, message type, message specification, F7. Type 0A asks for the edit buffer of a slot (specification 00-03 = slots A-D); types 0B-0E ask for banks 1-4 (specification = program or kit location). Performance dump request: type 28 hex (edit buffer, specification 00) or 29 hex (card bank, performance 00-63 hex). Type 14 hex asks for all controller values of a slot (00-03). The Nord Lead 2 never sends these requests itself.
SysEx pitfalls
Sizes. A program dump carries 132 data bytes, a percussion kit dump 1,056 and a performance dump 708. Each 8-bit parameter is sent as two nibbles, low nibble first. Percussion kits. Dump them from Program mode: from Performance mode only a reference to the kit is sent. The internal kit locations cannot be overwritten. Banks. After Dump All each program returns to its original number, but in the bank currently selected on the instrument. A program sent with Dump One goes back to the edit buffer of its original slot.
Source: Clavia Nord Lead 2 English User Manual v1.0, printed pp. 32, 73 and 93-98 ↗
Specifications
- Produced
- 1997–2003
- Synthesis
- Virtual analogue: digital emulation of analogue subtractive synthesis
- Polyphony
- 16 voices
- Multitimbrality
- 4 parts (program slots A-D)
- Oscillators
- 2 per voice. Osc 1: sine, triangle, sawtooth or pulse. Osc 2: triangle, sawtooth, pulse or noise. Hard sync and FM of Osc 1 from Osc 2
- Filter
- Multimode: 12 dB and 24 dB low-pass, band-pass, high-pass, notch with 12 dB low-pass; resonance, ADSR, keyboard tracking, distortion
- Memory
- 99 programs (01-40 user), 10 percussion kits, 100 factory performances. A PCMCIA S-RAM card adds 297 programs, 30 percussion kits and 100 performances
- Keyboard / format
- 4 octaves, velocity sensitive; pitch stick and modulation wheel
- Outputs
- 4 line outputs (A-D, one per slot), stereo headphone output
- MIDI
- MIDI In and MIDI Out
Known issues and maintenance
Memory. Only internal programs 01-40 can be overwritten; the factory RAM programs are also kept as ROM performances. Saving performances needs a PCMCIA S-RAM card. Cards from the original Nord Lead must be updated before use (display shows UP, press Store); the update erases programs 1-11 of card bank 1, so dump them first. Operating system. Nord lists v1.06 as the final version, supplied as an EEPROM chip that is now out of stock.
Sources
to be verifiedThese notes have not been checked against the sources yet. Corrections are welcome in the comments.
- Clavia Nord Lead 2 English User Manual v1.0 (OS Version 1.0, Print Edition 1) ↗ — Memory, PCMCIA cards, connections, Global MIDI Channel, bulk dump procedure and the System Exclusive implementation
- Nord: Nord Lead 2 (legacy product), overview and specifications ↗ — Production years 1997-2003, voices, oscillators, filter, memory, outputs, SysEx bulk dumps, weight
- Nord: Nord Lead 2 downloads ↗ — Manual, factory bank and sound cards as SysEx files, final OS v1.06
- Paul Nagle, "Clavia Nord Lead 2", Sound On Sound, September 1997 ↗ — Contemporary review: 16 voices, four outputs, UK price, memory, no MIDI Thru, no aftertouch sent, verdict
Sign in to write a comment.
Comments
0