no image yet
Clavia · Synthesizer · 2001

Clavia Nord Lead 3

The Clavia Nord Lead 3 is a four-octave virtual analog synthesizer made from 2001 to 2007, with a rack version called the Nord Rack 3. Clavia calls its engine Advanced Subtractive Synthesis: two oscillators with six waveforms each can produce classic analog shapes or work as a 2- or 4-operator FM engine. It plays 24 voices across four parts, and its stereo Unison mode stacks five detuned voices per note without reducing that polyphony. The Lead 3 was the first Nord Lead with a display, and its knobs are rotary encoders surrounded by LED rings that show the current value. Sound On Sound saw it as an evolutionary step for the Nord Lead line, noting the return of FM, the 24-voice polyphony and four audio outputs. Programs and performances are kept in flash memory, 1,024 programs and 256 performances, with no backup battery. Programs and performances can be sent as System Exclusive data one at a time with SHIFT + MIDI (Dump One), or a whole bank of 128 at a time from the Synth menu. A single program arrives in its part and must be stored; a bank is received into a bank that the instrument erases first. Clavia's Nord Sound Manager librarian saves the same data as raw SysEx files.

Sign in to upload or comment

SysEx messages

0 files

This instrument is still waiting for its first SysEx.

If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.

Upload a SysEx

SysEx guide

Manufacturer ID
33
Model ID
09
Default device ID
Instr. SysEx ID in the MIDI menu, 1-127 or All

Receiving a dump

1. Press SYNTH and set Memory Protect to Off. 2. In the MIDI menu set Instr. SysEx ID to match the device ID in the file, or to All. 3. Store the System Settings if the change must survive power-off. 4. For a single program or performance, just start the sender: it replaces what is loaded in its part and is not stored. 5. For a whole bank, press SYNTH, open Program Bank Receive (or Performance Bank Receive), choose the bank with the dial and press the right navigator button twice. The bank is erased and the display shows that it is waiting for the dump; then start the sender.

Sending a dump from the instrument

Single program or performance: load it into a part and press SHIFT + MIDI (Dump One). Whole bank: press SYNTH, go to the Program Dump (or Performance Dump) menu, choose the bank with the dial and press the right navigator button. The display shows Program Dump Completed at the end.

Requesting a dump

Documented in the manual: message type 30 requests a program from a part, 31 from a memory location; 38 and 39 do the same for performances; 40 requests a snapshot of all controllers. The Nord Lead 3 never sends these requests itself.

SysEx pitfalls

Receiving a bank erases the selected bank first; a file with fewer than 128 programs leaves the other locations empty. A program sent with Dump One comes from its part and goes back to that part, not to a memory location, so it must be stored by hand. Programs inside a bank dump return to their original locations but in the bank selected on the receiving unit. The manual notes that the Nord Lead 2 and Nord Lead 3 share manufacturer and model identification, so use a SysEx ID different from the Nord Lead 2 global channel when both are connected.

Source: Nord Lead 3 User Manual v1.2x (Spanish edition), pp. 139, 143-147, 161-162, 167-176 ↗

Specifications

Produced
2001–2007
Synthesis
Virtual analog subtractive synthesis with 2- or 4-operator FM
Polyphony
24 voices, also in stereo Unison mode
Multitimbrality
4 parts (A to D)
Oscillators
2 per voice, six waveforms each, with sync, FM, AM and ring modulation options
Filter
Single modes LP, HP, BP, BR, Classic and Dist LP, plus multi-filter modes with a second cutoff frequency
Memory
Flash memory: 8 banks of 128 programs (1,024) and 2 banks of 128 performances (256)
Keyboard / format
4 octaves, velocity and aftertouch, octave shift; rack version Nord Rack 3
Outputs
4 mono line outputs (A to D), headphones
MIDI
In, Out, Thru

Known issues and maintenance

Memory Protect is on when the instrument leaves the factory and must be switched off before storing or receiving programs. Changes made in the MIDI and Synth menus are lost at power-off unless System Settings are stored. Programs and the operating system are kept in flash memory, with no backup battery.

Sources

to be verified

These notes have not been checked against the sources yet. Corrections are welcome in the comments.

  1. Clavia, Nord Lead 3 User Manual v1.2x (Spanish edition) ↗ — Synthesis, polyphony, filter types, flash memory, Memory Protect, SysEx ID, dump procedures and the SysEx implementation
  2. Nord Keyboards: Nord Lead 3 specifications (legacy products) ↗ — Production years, keyboard, memory, outputs, MIDI ports, SysEx bulk dumps
  3. Nord Keyboards: Nord Lead 3 (legacy products) ↗ — Production years 2001-2007 and feature summary
  4. Clavia, Nord Lead 3 Sound Manager English User Manual Edition 1.0x ↗ — The librarian saves programs and performances as raw binary SysEx files
  5. Simon Trask, "Clavia Nord Lead 3", Sound On Sound, July 2001 ↗ — First display in the Lead line, return of FM, 24 voices, four outputs, verdict

Comments

0

Sign in to write a comment.

An unhandled error has occurred. Reload 🗙

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.