Clavia Nord Rack
The Clavia Nord Rack is the rack version of the first Nord Lead, the virtual analog synthesizer with which Clavia started its Nord line in the mid-1990s. It uses the same sound engine and the same owner's manual as the keyboard: a subtractive synth with two oscillators and a 12 or 24 dB filter, four voices as standard and twelve with the voice expansion, and four program slots that can be layered or played on separate MIDI channels. The internal memory holds 99 programs, 40 of them free for the owner's sounds, plus ten percussion kits. With the expansion fitted, a battery-backed PCMCIA S-RAM card adds three more banks of programs and room for 100 performances. Without a keyboard, the Rack is played from an external MIDI controller and set up from its own panel. Programs, percussion kits and performances can be sent as System Exclusive data, one at a time with Shift + Dump One or all together with Shift + Dump All. The format is published in the manual, which gives one SysEx implementation, with model ID 04, for the keyboard and the Rack. A single program arrives in the edit buffer of the active slot and must be stored; a full bank replaces the bank currently selected.
SysEx messages
0 filesThis instrument is still waiting for its first SysEx.
If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.
Upload a SysExSysEx guide
- Manufacturer ID
- 33
- Model ID
- 04
- Default device ID
- Global MIDI Channel (device ID 0-15)
Receiving a dump
1. Set the Global MIDI Channel (Shift + MIDI Ch, then MIDI Ch again) to match the device ID in the file. 2. To receive a whole bank, first scroll to a program number in the bank (program or performance bank) that should be replaced. 3. Start the transmission on the sending device. A bank replaces the selected bank; a single program goes to the edit buffer of the active slot and must be stored with Store.
Sending a dump from the instrument
1. For programs or percussion kits make sure the Rack is not in Performance mode; for performances enter Performance mode. 2. To send one item, select it and hold Shift while pressing Dump One (Oct Shift +). 3. To send all programs or performances, hold Shift and press Dump All (Oct Shift -).
Requesting a dump
Documented in the manual: patch dump request with message type 0A (edit buffer, slot A-D) or 0B-0E (banks 1-4), performance request 28 (edit buffer) or 29 (card bank), and an All Controllers request. The instrument never sends requests itself.
SysEx pitfalls
Programs in a bank dump keep their position but are stored in the bank selected on the receiving unit. A single program sent with Dump One returns to the edit buffer, not to a memory location. Performance dumps contain only references to percussion kits: dump kits separately from Program mode. ROM percussion kits cannot be overwritten.
Specifications
- Synthesis
- Virtual analog subtractive synthesis
- Polyphony
- 4 voices, 12 with the voice expansion
- Multitimbrality
- 4 program slots (A to D), each on its own MIDI channel
- Oscillators
- 2 per voice
- Filter
- Switchable 12 or 24 dB
- Memory
- 99 programs (40 user locations) and 10 percussion kits; a PCMCIA S-RAM card (with the expansion) adds 3 banks of programs and 100 performances
- Keyboard / format
- Rack module without keyboard
- Outputs
- Left and right line outputs
- MIDI
- MIDI In, MIDI Out
Sources
to be verifiedThese notes have not been checked against the sources yet. Corrections are welcome in the comments.
- Clavia, Nord Lead Owner's Manual, Software Version 2.x (English v2.0 Edition 2.x) ↗ — Covers the Nord Lead and its rack version the Nord Rack: memory, polyphony, slots, Global MIDI Channel, bulk dump, SysEx implementation, MIDI chart for keyboard and rack
- Nord Keyboards: Nord Lead (legacy products) ↗ — Oscillators, filter, polyphony and memory of the Nord Lead engine; production of the keyboard 1995-1997
- Nord Keyboards: Nord Lead downloads (legacy products) ↗ — Manual, Factory Banks and Sound Card 1-4 archives
Sign in to write a comment.
Comments
0