Crumar Bit 99
The Bit 99 is a six-voice analogue polyphonic synthesizer made in Italy by Crumar under the BIT name in 1985, and sold in the UK by Chase. It is the keyboard version of the Bit 01 expander and the successor of the Bit One. Each voice has two digitally controlled oscillators with triangle, sawtooth and variable pulse waves that can be combined, plus noise, a filter with its own ADSR envelope, an ADSR amplifier envelope and two LFOs. The 61-key keyboard is velocity sensitive, and velocity can drive pulse width, filter, amplifier and LFO rate. Of its 99 memories, 1 to 75 hold sounds and 76 to 99 hold split or layered combinations, which play three voices per sound. It also has master keyboard features unusual for its price: a MIDI keyboard split over two channels and remote program changes. Reviewers in 1985 praised the sound and the value, while finding editing slow and modulation limited. Whole memories are saved on cassette. Over MIDI the Bit 99 sends and receives single programs as System Exclusive messages: one message carries one sound (74 data bytes) or one split/double combination (14 bytes), and a request message makes the unit send a chosen program. The manual states that the data are interchangeable with the Bit 01 expander.
SysEx messages
0 filesThis instrument is still waiting for its first SysEx.
If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.
Upload a SysExSysEx guide
- Model ID
- 2n (n = MIDI channel; Bit 01 uses 1n)
- Default device ID
- MIDI channel 1 at power-up (Omni on)
Receiving a dump
1. Set the receive channel (parameter 73) or Omni mode (parameter 72) to match the sender. 2. Save the memory to cassette first: the manual warns that MIDI program data bypasses the Memory Protect switch.
Requesting a dump
Send F0 25 2n 09 0jjjdddd pp F7: jjj = destination device (001 Bit 01, 010 Bit 99), dddd = channel the Bit 99 sends on, pp = program 0-98. The reply is a single program dump, command 07H.
SysEx pitfalls
One program per message: 07H carries the program number (00-62H) plus 74 bytes for a sound or 14 bytes for a split/double. Each 8-bit value is sent as two bytes, low nibble first. No full-memory MIDI dump is documented.
Source: Bit 99 Owner's Manual v1.0, June 1985, Appendix: MIDI Details and MIDI Exclusive Codes, pp.29-33
Specifications
- Synthesis
- Analogue subtractive with digitally controlled oscillators
- Polyphony
- 6 voices (3 + 3 in Split or Double)
- Multitimbrality
- Two sounds in Split or Double mode
- Oscillators
- 2 DCOs per voice: triangle, sawtooth and variable pulse (combinable), 32' to 4' plus semitone offset; noise
- Filter
- VCF with cutoff, resonance, ADSR envelope, keyboard tracking and velocity control
- Memory
- 99 programs: 75 sounds and 24 split/double combinations
- Keyboard / format
- 61 keys, velocity sensitive, no aftertouch
- Outputs
- Upper and Lower outputs, headphones, tape in/out
- MIDI
- In, Out, Thru
Known issues and maintenance
Program data received via MIDI bypasses the Memory Protect switch. Loading from cassette overwrites the whole memory.
Sources
to be verifiedThese notes have not been checked against the sources yet. Corrections are welcome in the comments.
- BIT 99 Owner's Manual, Version 1.0, June 1985 (BIT, Castelfidardo) — Read as page images of a scanned third-party copy. Architecture, MIDI parameters, System Exclusive codes, program bitmaps, cassette interface
- Paul Fishman, Bit 99 (Synthcheck), International Musician & Recording World, October 1985 ↗ — Oscillators, envelopes, LFOs, memory layout, velocity, no aftertouch, cassette storage
- Tim Goodyer, A Bit On The Side, Electronics & Music Maker, October 1985 ↗ — 61 keys, outputs, MIDI In/Out/Thru, MIDI options, price
- Julian Colbeck, Bit 99 Synth, One Two Testing, November 1985 ↗ — Polyphony in split/layer, memory, MIDI channel options, verdict
- Gordon Reid, Crumar Bit One, Bit 01 & Bit 99, Sound On Sound, August 1998 ↗ — Family history and release date
Sign in to write a comment.
Comments
0