Digitech GSP2101

Photo: bergera30 (Flickr) · CC BY 2.0 ↗

Digitech · Effect Processor

Digitech GSP2101

The DigiTech GSP 2101 is a two-rackspace studio tube preamp and multi-effects processor for guitar. DigiTech's surviving manual covers the GSP-2101 Artist, which the company presents as the successor of the original GSP 2101. It pairs a preamp with two 12AX7A tubes and six distortion types, three tube and three solid state, with a digital effects section built on DigiTech's S-DISC processor, where effects can be placed in any order and repeated within a chain. The Artist stores 140 factory and 100 user programs, plus user-built algorithms, and an optional PPC-210 card expands the factory memory and processing. It has a high-impedance guitar input, balanced speaker-compensated outputs on XLR and TRS jacks, a headphone output, an effects loop and MIDI In, Out and Thru with merging. Every effect parameter can be linked to MIDI continuous controllers. The MIDI chart marks System Exclusive as transmitted and recognized. From the MIDI setup menu the unit can dump its entire memory, meaning all user programs, algorithms and the Utility and MIDI setups, or send a single program under a different program number. The data can be sent back to the unit or to another 2101 to restore it.

SysEx messages

0 files

This instrument is still waiting for its first SysEx.

If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.

Upload a SysEx

SysEx guide

Manufacturer ID
00 00 10

Receiving a dump

1. In the MIDI setup menu set Main MIDI Receive Channel (1-16 or ALL, not NONE). 2. Send the dump to MIDI In; the manual gives no further receive step.

Sending a dump from the instrument

1. Press MIDI to enter the MIDI setup menu and press NEXT twice (Dump system data). 2. Press Function key 2; the display shows the number of bytes to send. 3. Press Function key 1 to send all user programs, algorithms and setups (Function key 2 aborts). 4. For one program: press NEXT three times, choose the program with Function key 1 and the Data wheel, the target number with Function key 2, then press Function key 3.

SysEx pitfalls

Dump size varies with the number of user programs and algorithms (18,340 bytes in the manual's example). Both units should run the same software version. The byte format is not in the manual; DigiTech offered SysEx documentation on request.

Source: DigiTech GSP-2101 Artist Owner's Manual 18-0267-F (1996), pp. 63, 67-68, 89, 104 ↗

Specifications

Memory
GSP-2101 Artist: 100 user and 140 factory programs; 32 factory and about 12 user algorithms
Keyboard / format
2U rack unit (19 x 3.5 x 10 in)
Outputs
Balanced XLR and 1/4-inch TRS outputs (+4 dBu), headphone output, effects send and return
MIDI
MIDI In, MIDI Out (with merge option), MIDI Thru

Known issues and maintenance

The unit contains a lithium backup battery (manual safety page); no replacement procedure is given.

Sources

to be verified

These notes have not been checked against the sources yet. Corrections are welcome in the comments.

  1. DigiTech GSP-2101 Artist Owner's Manual, part no. 18-0267-F, 1996 ↗ — Introduction p. 5, programs p. 10, MIDI channel p. 63, SysEx dumps pp. 67-68, SysEx documentation p. 89, MIDI chart p. 104, specifications p. 105
  2. DigiTech Product Manuals page ↗ — Lists the GSP2101 Artist manual under Discontinued, Rack Mounts

Comments

0

Sign in to write a comment.

An unhandled error has occurred. Reload 🗙

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.