E-MU Systems E-IV
The Emulator IV, or E-IV, is a rack-mounted 16-bit sampler from E-mu Systems, documented in a 1994 operation manual. It plays 128 voices (64 in stereo), is 16-part multitimbral (32 MIDI channels with an option card) and ships with 8 MB of sample RAM, expandable to 128 MB with SIMMs, enough for more than 24 minutes of sampling. It samples at 22.05, 24, 44.1 or 48 kHz in mono or stereo, with 16-bit converters in and 18-bit out. Each of its 128 channels runs through a Z-Plane digital filter offering lowpass, highpass and bandpass types, swept EQs, phasers, a flanger and morphing vocal formant filters, with three envelopes and two LFOs per channel. Two SCSI ports handle hard disks, optical drives and CD-ROM; the E-IV reads EIII and EIIIX libraries and Emax II and Akai S1000/S1100 banks. Sound On Sound called it a performer that sets a new standard in the sampler market. Over MIDI the E-IV sends and receives individual samples with the MIDI Sample Dump Standard, in 14- or 16-bit words, with loop points kept but no preset parameters. Under the EOS operating system it can also dump the current preset's parameters, without samples, as System Exclusive to another E4-compatible unit. E-mu did not print the SysEx format in the manuals.
SysEx messages
0 filesThis instrument is still waiting for its first SysEx.
If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.
Upload a SysExSysEx guide
- Manufacturer ID
- 18
Receiving a dump
For a sample dump: Sample Manage, select the destination sample, Utils (F1), Dump... (F2), set Direction to Receive; the selected sample is overwritten. For preset data under EOS: no switch is described; set the same MIDI Device ID on both units (Master, MIDI (F6), Mode (F1), MIDI Device ID).
Sending a dump from the instrument
Sample (MIDI Sample Dump Standard): 1. Press Sample Manage. 2. Select the sample. 3. Press Utils (F1), then Dump... (F2). 4. Set Direction to Transmit, Word Size to 14 or 16 bits and, for stereo samples, the side. 5. Press OK. Preset (EOS): 1. Press Preset Manage and select the preset. 2. Press Utils, then Dump... (F2); transmission starts at once.
SysEx pitfalls
Sample dumps carry no preset parameters but keep loop data; 14-bit words are about 30% faster for instruments of 14 bits or less. A second MIDI cable (closed loop) enables handshaking and is much faster. Sample numbers map one to one, so an incoming sample 36 overwrites location 36. Preset dumps contain no sample data and replace the same-numbered preset on the receiving unit. Loop ticks after import may be repaired with Sample Integrity.
Specifications
- Synthesis
- Sampling, 16-bit A/D and 18-bit D/A, with Z-Plane digital filters
- Polyphony
- 128 voices (64 stereo)
- Multitimbrality
- 16 parts (32 MIDI channels with optional MIDI card)
- Filter
- 128 Z-Plane digital filters: 12/24/36 dB lowpass, highpass, bandpass, swept EQ, phasers, flanger, vocal formant
- Memory
- Up to 1000 samples and 1000 presets per bank; 8 MB sample RAM standard, 128 MB maximum
- Keyboard / format
- Rack module (H 5.25 in / 13.3 cm, W 17.125 in / 43.5 cm)
- Outputs
- Main stereo on balanced XLR and 1/4 in TRS, 6 balanced submix outputs; AES/EBU or S/PDIF digital I/O
- MIDI
- In, Out, Thru; expansion slot for a second MIDI port
Sources
to be verifiedThese notes have not been checked against the sources yet. Corrections are welcome in the comments.
- E-mu Systems, Emulator IV Operation Manual, FI460 Rev. D (1994) ↗ — Manufacturer manual on a third-party host: features, specifications, MIDI Sample Dump, SMDI
- E-mu Systems, EOS 4.0 Software Manual ↗ — Manufacturer manual on a third-party host: MIDI Device ID, Dump Preset, MIDI implementation chart for EOS units including the E-IV
- Paul Wiffen, "Emu Systems Emulator IV", Sound On Sound, April 1995 ↗ — Review: filters, outputs, multitimbrality, verdict
Sign in to write a comment.
Comments
0