E-MU Systems Emax II

Photo: GhostRiderSebas (Wikimedia Commons) · CC BY-SA 4.0 ↗

E-MU Systems · Sampler · 1989

E-MU Systems Emax II

The Emax II is E-mu Systems' 16-bit sampling keyboard of 1989, successor to the 12-bit Emax. It plays 16 stereo voices, keeping 16 even with mono samples, samples at rates from 20 to 39 kHz with a 16-bit input and an 18-bit output, and was sold with 1 MB of memory expandable to 8 MB, later 2 MB in the stereo models. The Turbo version added 4 MB as standard and an internal hard disk. Each preset passes through a resonant lowpass filter and amplifier with five-stage envelopes, filters Sound On Sound later called utterly superb. The 61-note keyboard is velocity sensitive and the unit answers MIDI aftertouch. Two main outputs, six submix outputs in three stereo pairs and six submix inputs sit on the rear panel with MIDI In and Out/Thru, SCSI and an RS-422 port. It loads Emulator III library banks and original Emax banks up to 1 MB. Music Technology found it a very impressive instrument. Its SysEx role is the MIDI Sample Dump Standard: the Emax II sends and receives samples, but only when another device or a computer starts the transfer. Primary voices are addressed as sample numbers 0 to 87 and secondary voices as 256 to 343, one per key. The manual documents no dump of presets or settings.

SysEx messages

0 files

This instrument is still waiting for its first SysEx.

If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.

Upload a SysEx

SysEx guide

Manufacturer ID
18

Receiving a dump

No front panel procedure: the Emax II only sends and receives samples in response to a MIDI command, so the other device or computer must start the transfer.

Sending a dump from the instrument

No front panel procedure. Request the sample from the other device: primary voices are sample numbers 0-87 and secondary voices 256-343, one per key of the 88-note range.

Requesting a dump

The Emax II answers MIDI Sample Dump requests from another device; a request for a key with no voice assigned is ignored.

SysEx pitfalls

Only sample data is transferred; no preset dump is documented. If transferred samples click, lower Loop Start by 2 or 3 samples and raise Loop Length by 1. The MIDI chart refers System Exclusive details to E-mu (Call for Documentation).

Source: Emax II Operation Manual, Digital Sound Transfer p. 221; MIDI implementation chart p. 237

Specifications

Produced
1989–1995
Synthesis
16-bit sampling with resonant lowpass filter and amplifier per preset
Polyphony
16 stereo voices (32 audio channels)
Filter
Resonant lowpass VCF with 5-stage AHDSR envelope; cutoff and Q modulated by velocity
Memory
100 presets per bank; 1 or 2 MB sample RAM expandable to 8 MB; Turbo 4 MB with internal hard disk
Keyboard / format
61 keys, velocity sensitive (14 curves), no aftertouch on the keyboard; rack version also made
Outputs
2 main (stereo), 6 submix (3 stereo pairs), stereo/phones and mono; 6 submix inputs
MIDI
In, Out/Thru

Sources

to be verified

These notes have not been checked against the sources yet. Corrections are welcome in the comments.

  1. E-mu Systems, Emax II Operation Manual (ManualsLib copy) — Manufacturer manual on a third-party host: Digital Sound Transfer (MIDI Sample Dump), technical specifications, MIDI implementation chart
  2. Dave Richardson, "E-mu Systems Emax II", Music Technology, February 1990 ↗ — Review: voices, memory, sample rates, filters, outputs, storage, compatibility, prices, verdict
  3. Janet Harniman-Cook, "E-mu Systems Emax II" (Retrozone), Sound On Sound, July 1998 ↗ — Retrospective: launch 1989, end of production 1995, models, memory, keyboard, filters

Comments

0

Sign in to write a comment.

An unhandled error has occurred. Reload 🗙

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.