E-MU Systems ESI-32

Photo: Ensemble,_002,_CD_burner,_&_ESI32_@_Sarlacc_Studios.jpg: nourogg; derivative work: Clusternote (talk) · CC BY-SA 2.0 ↗

E-MU Systems · Sampler

E-MU Systems ESI-32

The ESI-32 is a 2U rack sampler from E-mu Systems, reviewed by Sound On Sound in January 1995 as a low-cost route into 16-bit stereo sampling. It plays 32 voices, or 16 in stereo, is 16-part multitimbral and comes with 2 MB of memory expandable to 32 MB with SIMMs. It samples in mono or stereo at 44.1 or 22.05 kHz with a 16-bit input and an 18-bit output. Each channel has an analog-sounding 24 dB per octave resonant lowpass filter, three AHDSR envelopes and an LFO. Four individual polyphonic outputs, MIDI In, Out and Thru, and optional SCSI and S/PDIF boards complete the unit. The ESI-32 reads the EIII and EIIIX libraries and imports Emax II and Akai S1000/S1100 banks. Sound On Sound called it an absolute bargain. The ESI-32 exchanges samples over MIDI with the MIDI Sample Dump Standard, in 14- or 16-bit words, keeping loop points but no preset parameters, over one cable or two cables with handshaking. The manual documents no SysEx dump of presets or settings; banks are kept on disk.

SysEx messages

0 files

This instrument is still waiting for its first SysEx.

If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.

Upload a SysEx

SysEx guide

Manufacturer ID
18

Receiving a dump

1. Activate the Sample Management module. 2. Select submodule 9 (Sample Dump). 3. Choose Receive and press ENTER, then select the destination location (not 000). The incoming sample overwrites that location.

Sending a dump from the instrument

1. Activate the Sample Management module. 2. Select submodule 9. 3. Choose Transmit and press ENTER. 4. Select a word size of 14 or 16 bits and press ENTER. 5. Select the sample and press ENTER (for a stereo sample, choose the side). 6. Press ENTER to begin the Sample Dump.

Requesting a dump

When receiving from an Emax II, the ESI-32 requests the sample on the Emax II key that matches the chosen location (location 36 requests key 36).

SysEx pitfalls

Only sample data is transferred; preset parameters are not, loop data is kept. 14-bit words are needed by some instruments such as the SP-1200 and are 30% faster. Two MIDI cables (closed loop) allow handshaking and much faster transfers. Samples cannot be received into location 000. Match sample rates when sending to an Emax II.

Source: ESI-32 Operation Manual, Sample Dump, pp. 103-104

Specifications

Synthesis
16-bit sampling with resonant lowpass filter per channel
Polyphony
32 voices (16 stereo)
Multitimbrality
16 parts
Filter
24 dB/octave resonant lowpass per channel (32 filters)
Memory
2 MB sample RAM standard, 32 MB maximum
Keyboard / format
2U rack module
Outputs
4 individual 1/4 in unbalanced polyphonic outputs; optional S/PDIF digital I/O
MIDI
In, Out, Thru

Sources

to be verified

These notes have not been checked against the sources yet. Corrections are welcome in the comments.

  1. E-mu Systems, ESI-32 Operation Manual (ManualsLib copy) — Manufacturer manual on a third-party host: introduction, MIDI Sample Dump, MIDI implementation chart, specifications
  2. Mike Barnes, "Emu ESi32", Sound On Sound, January 1995 ↗ — Review: rack size, multitimbrality, MIDI ports, library compatibility, price, verdict

Comments

0

Sign in to write a comment.

An unhandled error has occurred. Reload 🗙

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.