E-MU Systems Proteus/3

Photo: ZugPlayz (Wikimedia Commons) · CC BY 4.0 ↗

E-MU Systems · Synthesizer

E-MU Systems Proteus/3

The Proteus/3, also called Proteus/3 World, is a 1U sample-playback module in E-mu's Proteus line, devoted to world and ethnic instruments. Sound On Sound reviewed it in August 1992 as the latest member of the family, which already included the pop and rock Proteus/1 and the orchestral Proteus/2. It shares the hardware and the operation manual of those models and carries its own 4 MB sound set of 192 instruments. The module plays 32 voices across 16 MIDI channels. A preset combines a primary and a secondary instrument; there are no filters, so sounds are shaped with pitch and amplitude modulation, layering and crossfades. The manual gives 192 preset locations, 64 of them programmable, and six outputs that work as three stereo pairs or six submixes. The reviewer judged its flexibility and sound quality unquestionable. From the Master menu the unit sends master settings, the program map, the tuning table, all factory or user presets, or one preset as System Exclusive. The manual documents the message format, with E-mu ID 18 and Proteus product ID 04, and requests for single presets, all user or factory presets, parameters, the tuning table and the program map.

SysEx messages

0 files

This instrument is still waiting for its first SysEx.

If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.

Upload a SysEx

SysEx guide

Manufacturer ID
18
Model ID
04

Receiving a dump

No switch is described: play the data into MIDI In from another Proteus or a sequencer. When transferring between two units, their ID numbers must match.

Sending a dump from the instrument

1. Press Master (LED on). 2. Select the Send MIDI Data page. 3. Choose Master Settings, Program/Preset Map, Tuning Table, Factory Presets, User Presets or Any Individual Preset. 4. Press the flashing Enter button. To record into a sequencer, set it to receive system exclusive data and start recording before sending.

Requesting a dump

Preset data request F0 18 04 dd 00 ll mm F7 (preset number lsb, msb; 7F 7F = all user presets, 7E 7F = all factory presets). Parameter value request F0 18 04 dd 02 pl pm F7, tuning table request F0 18 04 dd 04 F7, program map request F0 18 04 dd 06 F7.

SysEx pitfalls

Preset data is 256 data bytes per preset plus header and checksum (sum of all data bytes). Data words are 14-bit signed values sent as lsb, msb.

Source: Proteus Operation Manual (Proteus/1, /2, /3), Master menu and MIDI Specifications, viewer pp. 18, 24, 119-121

Specifications

Synthesis
Sample playback, 16-bit samples in ROM, two instruments per preset, no filters
Polyphony
32 voices
Multitimbrality
16 MIDI channels
Oscillators
Primary and secondary instrument per preset
Filter
None
Memory
192 preset locations, 64 user-programmable
Keyboard / format
1U rack module (H 1.75 in, W 19 in)
Outputs
6 outputs (3 stereo pairs, configurable as 6 submixes), 4 submix inputs
MIDI
In, Out, Thru

Sources

to be verified

These notes have not been checked against the sources yet. Corrections are welcome in the comments.

  1. E-mu Systems, Proteus Operation Manual (Proteus/1, Proteus/1 Plus 2, Proteus/2, Proteus/3) — Manufacturer manual read on a third-party viewer: introduction, Master menu Send MIDI Data, technical specifications, SysEx format and commands
  2. Nigel Humberstone, "Emu Proteus 3 World", Sound On Sound, August 1992 ↗ — Review: sound set, instruments, polyphony, outputs, relation to Proteus/1 and /2, UK price, verdict

Comments

0

Sign in to write a comment.

An unhandled error has occurred. Reload 🗙

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.