no image yet
Elektron · Drum Machine · 2017

Elektron Digitakt

The Elektron Digitakt is a compact digital drum machine and sampler with Elektron's step sequencer, shipped from 2017. It has eight audio tracks, each playing one sample through overdrive, a multimode filter, a base-width filter, an amplifier and an LFO, with delay and reverb sends and a compressor on the master. Samples can be recorded through its inputs or loaded from a computer. Eight further tracks sequence external MIDI gear with chords, pitch bend and assignable controllers. Each project holds 128 patterns and up to 64 MB of samples in 127 slots, and the internal +Drive keeps 128 projects, a library of 2048 Sounds and the sample bank. Sound On Sound said it packs an awful lot of potential into its small frame. The SysEx dump in the Settings menu sends the active project or single patterns, and Sounds can be sent from the Sound manager. The unit is always listening for incoming dumps. SysEx carries only project, pattern and Sound data: the samples themselves are not included.

SysEx messages

0 files

This instrument is still waiting for its first SysEx.

If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.

Upload a SysEx

SysEx guide

Manufacturer ID
00 20 3C

Receiving a dump

1. The Digitakt is always listening for SysEx and can receive backed up projects or patterns at any time. 2. To choose the destination, open SETTINGS, SYSEX DUMP, SYSEX RECEIVE. 3. Choose PATTERN and a slot, or SOUNDS and a +Drive bank slot or ANYWHERE. 4. Press YES to listen, then start the sender. NO stops listening.

Sending a dump from the instrument

1. Open SETTINGS, SYSEX DUMP, SYSEX SEND. 2. Choose PROJECT (settings, patterns and Sounds in the Sound pool of the active project) or PATTERN and the pattern. 3. Make sure the receiver is listening and press YES. 4. Single Sounds are sent from the SOUND MANAGER with SEND SYSEX.

SysEx pitfalls

SysEx dumps contain project, pattern and Sound data only, not the samples, which must be backed up separately with Elektron Transfer over USB. Elektron recommends its C6 utility and the TM-1 interface for up to ten times faster MIDI transfers.

Source: Digitakt User Manual OS 1.54, 15.6 SYSEX DUMP pp. 71-73 ↗

Specifications

Synthesis
Digital sample playback with sampling
Polyphony
Eight audio voices, one per audio track
Multitimbrality
8 audio tracks plus 8 MIDI tracks
Oscillators
One sample playback engine per audio track
Filter
Multimode filter and base-width filter per audio track
Memory
Per project: 128 patterns, 127 sample slots (64 MB); +Drive: 128 projects, 2048 Sounds
Keyboard / format
Tabletop unit, no keyboard
Outputs
Main out L/R balanced, headphones, 2 audio inputs
MIDI
In, Out/Sync A, Thru/Sync B; USB 2.0

Sources

to be verified

These notes have not been checked against the sources yet. Corrections are welcome in the comments.

  1. Elektron, Digitakt User Manual OS 1.54 ↗ — Shipping date in foreword, architecture, data structure, technical information, SysEx dump procedures
  2. Elektron, Digitakt support and downloads ↗ — Current OS, manuals, Transfer software
  3. Simon Sherbourne, Elektron Digitakt, Sound On Sound, September 2017 ↗ — Review: price, memory, verdict

Comments

0

Sign in to write a comment.

An unhandled error has occurred. Reload 🗙

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.