Eventide H3500
The Eventide H3500 is the top model of the H3000 Ultra-Harmonizer range, sold as the H3500-DFX and the H3500-DFX/E and in broadcast B versions. Eventide's model table gives it the widest selection of algorithms and factory presets in the family, and the DFX/E variants carry the long sampler option. The H3000 line combines pitch shifting with delays, reverbs, stutter effects, a vocoder, a string modeller, phasers and sampling, with almost every parameter controllable over MIDI. The unit is a two-rackspace stereo processor with balanced inputs, transformerless outputs and 16-bit conversion at 44.1 kHz; delay memory reaches 95 seconds on the DFX/E version. Eventide documents it in the same instruction manual as the H3000 models. The H3500 dumps over MIDI as Eventide system exclusive: all user programs, the current edit, or the program change map. The messages use manufacturer ID 1C and model code 60, and a computer can ask the unit for each kind of dump with a short request message described in the manual.
SysEx messages
0 filesThis instrument is still waiting for its first SysEx.
If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.
Upload a SysExSysEx guide
- Manufacturer ID
- 1C
- Model ID
- 60
- Default device ID
- Device number 0 (range 0-99, set with Dev on the Expert MIDI page)
Receiving a dump
1. Press FUNCTION three times and press (Expert). 2. Make sure the softkey shows (SysX=On). 3. Set (Dev) to the device number used when the data was sent. 4. Send the dump to MIDI In.
Sending a dump from the instrument
1. Connect MIDI Out to the computer's MIDI In. 2. Press FUNCTION five times (MIDI Computer and Sequencer Functions). 3. Press (Dumps). 4. Press (Dump Pre) for all user programs, (DumpEdit) for the current edit or (Dump Map) for the program change map.
Requesting a dump
Header F0 1C 60, device number, route code 00, then 7C 46 45 34 36 42 43 (dump edit), 7C 46 45 34 32 43 30 (all user presets) or 7C 46 45 34 34 42 45 (program change map). Example for device 1: F0 1C 60 01 00 7C 46 45 34 32 43 30. The unit starts dumping right after the last byte.
SysEx pitfalls
Receiving a preset dump replaces the whole set of user programs; the same applies to the map and the current edit. SysX=Off blocks Eventide SysEx including dumps. The manual's request example shows no closing F7.
Specifications
- Memory
- Factory presets in many ranges from 150 to 999; user programs in battery-backed RAM (count depends on data compression)
- Keyboard / format
- 2U rack unit (3.5 x 19 x 13.5 in)
- Outputs
- Stereo differential transformerless outputs
- MIDI
- MIDI In, MIDI Out
Sources
to be verifiedThese notes have not been checked against the sources yet. Corrections are welcome in the comments.
- Eventide H3000 Ultra-Harmonizer Instruction Manual, models incl. H3500-dfx and H3500-dfx/e combined, January 1996; scanned PDF read as page images ↗ — Specifications p. 6, MIDI data dumping pp. 21-22, Expert MIDI p. 29, MIDI implementation chart p. 34, dump requests with header 1C 60 p. 35
- Eventide H3000 series product page ↗ — Model list and table with H3500DFX, H3500DFX/E and B variants, algorithm and preset ranges, sampler options
Sign in to write a comment.
Comments
0