Kawai GMega
The Kawai GMega, model XS-2, is a compact General MIDI synthesizer module built on Kawai's DMS2 engine. It uses 16-bit PCM and digital cyclic waves, 256 for tones and 256 for drums, through an 18-bit converter, and plays 32 voices. Two MIDI inputs feed 32 sections, so it can play 32 parts at once, and a serial port connects it directly to a Macintosh. Besides the GM and Sound Palette (SP) ROM banks it has a USER bank of 128 single patches, 7 drum kits and 128 percussion sounds. Unlike most GM modules it offers full editing: oscillator, filter and amplifier envelopes, low or high pass filters with resonance, six digital effect types and 55 temperaments. Its System Exclusive dumps cover the USER bank and the system settings (Dump All) or the sections and system only (Dump SEC+SYS). A computer can request the full dump, and Kawai's format document gives the exact pauses needed between packets when sending it back.
SysEx messages
0 filesThis instrument is still waiting for its first SysEx.
If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.
Upload a SysExSysEx guide
- Manufacturer ID
- 40
- Model ID
- 00 08 (group 00, machine 08)
- Default device ID
- Unit receive channel set with UNIT RCV CH (01A-16A)
- Suggested delay between messages
- 371 ms
Receiving a dump
1. Press SYSTEM to enter system edit mode. 2. Step with SYSTEM to UNIT RCV EXCL. 3. Set it to ON: exclusive messages are received on the UNIT RCV CH channel.
Sending a dump from the instrument
1. Press SYSTEM and set SNGL BANK SEL to USER. 2. Press SYSTEM until DUMP ALL is shown. 3. Move the cursor to the value and turn the dial to Y: SURE? is shown. 4. Turn the dial to Y again. COMPLETE is shown at the end; the dump takes over 3 minutes. DUMP SEC+SYS works the same way and sends only the sections and system.
Requesting a dump
Send F0 40 0n 01 00 08 F7 with the USER bank selected: the GMega answers with the same data as Dump All.
SysEx pitfalls
When sending a dump back, leave 371 ms between packets, at least 5000 ms after the first (system) packet and 1000 ms after single 128 and percussion 128. The system reserved packet must be returned exactly as received. For a Kawai Q-80, record the dump in real time on a track.
Source: Kawai GMega owner's manual pp. 96-103 and GMega Exclusive Format (groups D and E) ↗
Specifications
- Synthesis
- DMS2: 16-bit PCM and digital cyclic waves, General MIDI
- Polyphony
- 32 voices (with one source per tone)
- Multitimbrality
- 32 sections, 16 channels on each of two MIDI inputs
- Oscillators
- Up to 2 sources per single patch, chosen from 256 tone waves
- Filter
- Digital filter per source, low or high pass with resonance and envelope
- Memory
- ROM banks GM and SP plus a USER bank, each with 128 singles, 7 drum kits and 128 percussion patches
- Keyboard / format
- Desktop module (219 x 189 x 44 mm, 1.5 kg)
- Outputs
- Line out L/R, headphones
- MIDI
- MIDI In 1, In 2, Out/Thru 1, Thru 2; serial interface for Macintosh
Sources
to be verifiedThese notes have not been checked against the sources yet. Corrections are welcome in the comments.
- Kawai GMega (XS-2) owner's manual with wave list and GMega Exclusive Format (scanned PDF) ↗ — Features, system and dump pages, specifications, MIDI implementation chart, English SysEx format with packet timing
- Kawai Japan downloads: GMega ↗ — Lists the XS-2 (GMega) manual and the XC-3 (GMega LX) documents
Sign in to write a comment.
Comments
0