Kawai XD-5

Photo: Matt Perry · CC BY-SA 3.0 ↗

Kawai · Drum Machine · 1990

Kawai XD-5

The Kawai XD-5 is a rack-mounting 16-bit percussion synthesizer from 1990. Kawai presented it not as a drum machine but as a synthesizer for percussion sounds: it uses the DMS engine of the K4 and K4r, with 256 waves (41 digital cyclic waves built from up to 128 harmonics and 215 PCM samples), a resonant digital filter and ring modulation. Sounds are built as single patches, and a kit assigns singles to 88 MIDI notes. The unit stores 64 singles and 16 kits internally, the same again on a DC-16 card, plus 16 output patches. It plays 16 voices, or 8 in twin and double modes, and has stereo outputs plus six individual outputs. Its System Exclusive dumps carry one patch, a whole block of singles, kits or output patches, or all data, from the internal memory or the card. They can be sent from the front panel or requested by a computer, and Kawai's manual shows them stored on a Q-80 sequencer.

SysEx messages

0 files

This instrument is still waiting for its first SysEx.

If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.

Upload a SysEx

SysEx guide

Manufacturer ID
40
Model ID
00 06 (group 00, machine 06)
Default device ID
MIDI channel set with RCV CH (1-16)

Receiving a dump

1. Press SYSTEM and select the RCV group. 2. Press SYSTEM repeatedly until RCV EXCL is shown. 3. Set it to ON.

Sending a dump from the instrument

1. Select a patch in the internal memory or on the card: this decides which memory is sent. 2. Press WRITE until MIDI DUMP SELECT is shown. 3. With -NO and +YES choose SNGL, KIT, *SGL, *KIT, OUT, *OUT or ALL (* sends all patches of that type). 4. Press WRITE: DATA DUMP EXEC? is shown. 5. Press +YES, then +YES again at SURE?. BUSY is shown, then COMPLETED.

Requesting a dump

One patch: F0 40 0n 00 00 06 s1 s2 F7. Block: F0 40 0n 01 00 06 s1 s2 F7. All data: F0 40 0n 02 00 06 s1 00 F7. s1: 0 internal single or kit, 1 internal output patch, 2 card single or kit, 3 card output patch; s2: 0-63 singles, 64-79 kits, 0-15 output patches (block: 0 singles, 64 kits).

SysEx pitfalls

Exclusive data is received only with RCV EXCL ON. A single patch is 95 data bytes, a kit 453 and an output patch 9. A block dump stops if a patch has a check sum error. The unit answers with write complete or error messages (40h-43h), including a memory protect error.

Source: Kawai XD-5 owner's manual pp. 64-71 and XD-5 MIDI Data Format pp. 3-10 ↗

Specifications

Synthesis
DMS: 16-bit PCM and digital cyclic waves (256 waves), digital filter, ring modulation
Polyphony
16 voices (8 in TWIN and DBL modes)
Oscillators
Up to 2 sources per single patch, each selecting one of 256 waves
Filter
Digital filter with cutoff, resonance and envelope
Memory
64 singles and 16 kits internal, 64 singles and 16 kits on DC-16 card; 16 output patches
Keyboard / format
19 inch rack module (483 x 218.5 x 88 mm, 2.8 kg)
Outputs
Line out L/R (mono), 6 individual outputs, headphones
MIDI
In, Out, Thru

Known issues and maintenance

Memory is backed by an internal lithium battery rated over 5 years; Kawai recommends replacing it about every 5 years. Repairs may erase the memory, so save data to card first.

Sources

to be verified

These notes have not been checked against the sources yet. Corrections are welcome in the comments.

  1. Kawai XD-5 owner's manual with Wave List / MIDI Data Format (Japanese and English, scanned PDF) ↗ — Features, battery, RCV settings, MIDI data dump procedure, specifications, MIDI implementation chart dated Jun. 1990, SysEx format and function table
  2. Kawai Japan downloads ↗ — Lists the XD-5 owner's manual

Comments

0

Sign in to write a comment.

An unhandled error has occurred. Reload 🗙

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.