Korg M3
The Korg M3 is a music workstation introduced in 2007. It is built in two pieces: the M3-M sound module, with a colour touch screen, pads and sliders, sits in a 61, 73 or 88-key keyboard, and can also be used on its own. Its EDS engine plays 256 MB of sampled waveforms through two multimode filters per voice, with up to 120 voices. Programs can be layered and split in combinations of 16 timbres. The M3 adds a 16-bit sampler, a sequencer, KARMA phrase generation and drum tracks. Options include the EXB-RADIAS analogue modelling board, extra sample memory and a FireWire interface. Sound On Sound described it as a more affordable workstation derived from the OASYS. Programs, combinations, drum kits, global settings, songs and drum track patterns can be sent as System Exclusive data dumps and loaded back, and the M3 can also store SysEx from other instruments on USB media.
Sign in to upload or commentSysEx messages
0 filesThis instrument is still waiting for its first SysEx.
If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.
Upload a SysExSysEx guide
- Manufacturer ID
- 42
Receiving a dump
1. Press GLOBAL and open Global P1: MIDI, MIDI Routing page. 2. Make sure the MIDI Filter Exclusive box is checked (it is checked by default). 3. Open Global P0: Basic Setup and uncheck Memory Protect for the type of data you will receive. 4. Send the dump to the M3.
Sending a dump from the instrument
Data dumps are transmitted from Global mode. The Operation Guide (p. 140) lists what can be dumped: programs, combinations, drum kits and global settings; songs and cue lists; user drum track patterns; RADIAS formant motions. The step-by-step procedure is in the Parameter Guide, 'Dump:' p. 400.
SysEx pitfalls
Memory Protect must be off, otherwise received data is not written. Some USB-MIDI interfaces cannot transmit or receive the M3's exclusive messages.
Source: Korg M3 Operation Guide, pp. 26, 140, 142, Setup chapter and MIDI Implementation Chart ↗
Specifications
- Synthesis
- EDS (Enhanced Definition Synthesis) sample-based; optional EXB-RADIAS analogue modelling
- Polyphony
- 120 voices (single mode), 60 voices (double mode)
- Multitimbrality
- 16 timbres per combination
- Oscillators
- 1 or 2 oscillators per program, 4 velocity zones each; 256 MB preset PCM
- Filter
- Two multimode filters per voice (low-pass, high-pass, band-pass, band-reject), four routings
- Memory
- 1,664 programs, 1,792 combinations, 144 drum kits; USB storage
- Keyboard / format
- M3-M module with KYBD61 or KYBD73 (semi-weighted) or KYBD88 (RH3 hammer action)
- Outputs
- Main L/Mono and R, 4 individual outputs, headphones, optical S/PDIF out
- MIDI
- MIDI In, Out, Thru; USB (MIDI)
Known issues and maintenance
Sequencer data is not kept at power-off. Songs and user drum track patterns must be saved to USB media or sent as a MIDI data dump before switching off.
Sources
to be verifiedThese notes have not been checked against the sources yet. Corrections are welcome in the comments.
- Korg M3 Operation Guide (PDF, edition with October 2008 specifications) ↗ — MIDI data dump p. 140, memory protect p. 142, MIDI Filter Exclusive, specifications pp. 224-227, MIDI Implementation Chart dated 2007.1.13
- Gordon Reid, "Korg M3 Synth/Sampler", Sound On Sound, July 2007 ↗ — Launch review: KKS design, 120 voices, PCM, memory, OASYS heritage, UK prices, verdict
- Korg USA: M3 downloads ↗ — List of official manuals, MIDI implementation and SysEx documents
Sign in to write a comment.
Comments
0