Korg SQD-1
The Korg SQD-1 MIDI Recorder is a MIDI sequencer from 1985 with a built-in Quick Disk drive for storing songs. Its internal memory holds about 15,000 notes (about 7,500 when velocity is recorded) and a double-sided Quick Disk about 30,000. It records on two tracks: a sub track for one MIDI channel and a main track that collects up to 16 channels by bouncing, in real time or step time, with insert, delete, blank, erase and copy editing. The rear panel has MIDI In, two MIDI Out/Mix jacks, DIN sync and tape sync in and out, a click output and footswitch jacks for play/stop and record. DIP switches choose whether velocity, pitch bend and controllers, and aftertouch are recorded, and whether data transfers go to disk or to MIDI. The SQD-1 dumps its own memory as System Exclusive data: in Data Transfer mode with MIDI selected it sends the recorded sequence data as a series of blocks closed by a Data End Block, and it can receive the same data or answer a Data Dump Request from a computer. Its sequencer tracks do not record System Exclusive messages, but in Data Transfer mode it can store dumps that other Korg units send with the SQD-1 ID, such as the full memory of the DDD-5 drum machine.
SysEx messages
0 filesThis instrument is still waiting for its first SysEx.
If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.
Upload a SysExSysEx guide
- Manufacturer ID
- 42
- Model ID
- 07
- Default device ID
- None: the header uses the fixed format byte 30 (F0 42 30 07 ...), with no MIDI channel nibble
Receiving a dump
1. Set MIDI function switch No. 5 (Data Transfer) on the rear panel to OFF (MIDI). 2. Press DATA TRANSFER: the display shows TrAnS with the dot lit. 3. Press LOAD: the display shows LoAd. 4. Start the transmission from the sender; the display shows FnISH when the data has been received.
Sending a dump from the instrument
1. Set MIDI function switch No. 5 to OFF (MIDI). 2. Press DATA TRANSFER. 3. Put the receiver in load mode. 4. Press SAVE (the Play/Save key): the display shows SAvE, then FnISH when the dump has been sent. CANCEL stops it (Err.8).
Requesting a dump
Send F0 42 30 07 10 F7 (Data Dump Request) while the SQD-1 is in Data Transfer mode with switch 5 set to MIDI. Device ID Request: F0 42 40 F7, answered with F0 42 30 07 F7.
SysEx pitfalls
Function codes: 48 Sequence Data (up to 64 data bytes per block), 4F Data End Block, 10 Data Dump Request, 20 Data Dump Error. If the receiver sends a Data Dump Error, the SQD-1 shows Err.8 at the end of the transfer. System Exclusive is recognised only in Data Transfer mode with switch 5 set to MIDI.
Specifications
- Multitimbrality
- Records all 16 MIDI channels: multi-channel main track plus one-channel sub track
- Memory
- About 15,000 notes internal (about 7,500 with velocity); Quick Disk about 30,000 notes using both sides
- Keyboard / format
- None (desktop sequencer)
- Outputs
- CLICK OUT; DIN SYNC OUT and TAPE SYNC OUT
- MIDI
- MIDI IN, MIDI OUT/MIX x 2
Sources
to be verifiedThese notes have not been checked against the sources yet. Corrections are welcome in the comments.
- Korg SQD-1 MIDI Recorder Owner's Manual (English, scanned PDF read as page images) ↗ — Major features p. 3, recordable data pp. 27-28, data transfer to MIDI pp. 114-115, MIDI implementation and System Exclusive pp. 116-121, specifications p. 126
- Korg DDD-5 Owner's Manual (English, scanned PDF) ↗ — pp. 46 and 52-58: DDD-5 dumps sent with the SQD-1 ID so that the SQD-1 stores them
- Korg SQD Sequencer, One Two Testing, November 1985 (Julian Colbeck) ↗ — Contemporary review: UK price GBP 599, memory and Quick Disk capacity
Sign in to write a comment.
Comments
0