Kurzweil K2000
The Kurzweil K2000 is a 61-note sample-based synthesizer released in December 1991, the first instrument built on Kurzweil's Variable Architecture Synthesis Technology (VAST). Each program can stack up to 32 layers, and each layer runs a sample through one of 31 DSP algorithms. It plays 24 voices on up to 16 MIDI channels. Rack, sampling and later VX and VP versions followed, and Kurzweil ended the line in summer 2000. Programs, setups and other objects live in battery-backed program RAM. From software version 3 the Master mode object utilities can send any selection of objects out of MIDI Out as System Exclusive data, and each editor has its own Dump button. Sample audio is not part of these dumps: it travels with the MIDI Sample Dump Standard.
Sign in to upload or commentSysEx messages
0 filesThis instrument is still waiting for its first SysEx.
If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.
Upload a SysExSysEx guide
- Manufacturer ID
- 07
Sending a dump from the instrument
Software version 3: 1. Connect the K2000's MIDI Out to the receiver's MIDI In. 2. Press Master, then the Object soft button. 3. Press the Dump soft button. 4. Select the objects to send (same selection screen as the Save Objects dialog). 5. If selected objects have dependents that were not selected, answer the question Dump dependent objects? 6. Press OK: the objects are sent one by one out of MIDI Out. Each editor also has a Dump soft button for the object being edited.
SysEx pitfalls
Samples. The object dump sends the sample object, not the RAM sample data, which is sent with the MIDI Sample Dump Standard from the sample editor. A RAM sample object loaded back via MIDI will not point to the same sample data; objects that reference ROM samples stay valid. Setups. The Master table can be dumped, but its dependent objects are not included automatically.
Source: Kurzweil K2000 Musician's Guide Supplement, Ninth Edition, November 2000, pp. 4-63, 4-67 and 4-68
Specifications
- Produced
- 1991–2000
- Synthesis
- VAST: sample playback through 31 DSP algorithms, up to 32 layers per program
- Polyphony
- 24 voices
- Multitimbrality
- 16 parts
- Memory
- 120K battery-backed program RAM, expandable to 760K with the PRAM option; sample RAM up to 64 MB (not battery backed)
- Keyboard / format
- 61 notes with velocity, release velocity and pressure. Also made as the K2000R rack
- Outputs
- Six 1/4 inch jacks: Mix, A and B stereo pairs
Known issues and maintenance
Memory. Program RAM is battery backed, but sample RAM is volatile: samples are lost at power off and must be reloaded from disk. Setups. A multi-timbral setup is kept by saving the Master table; it can be dumped as SysEx, but the objects it depends on are not dumped with it. Operating system. The last K2000 OS is v3.87 (November 1999).
Sources
to be verifiedThese notes have not been checked against the sources yet. Corrections are welcome in the comments.
- Kurzweil K2000 Musician's Guide Supplement (Sampling Option, Version 3 Software), Ninth Edition, November 2000 — Object utilities and Dump over MIDI, sample dumps. Text read from a copy of the same PDF at cdn.shopify.com (syn051_kurzweil_k2000r_m.pdf)
- Kurzweil: K2000 Overview (legacy page and FAQ) ↗ — Models, 24 voices, PRAM and sample RAM, outputs, MIDI Sysex ID, SysEx dump of the Master table, last OS v3.87
- Kurzweil: product history (PRODHIST.txt) ↗ — December 1991 release of the 2000 series with VAST, 61-note keyboard, variants, discontinuation in summer 2000
- Craig Anderton, "Killer Kurzweil", Sound On Sound, March 1992 ↗ — Contemporary review: 24 voices, 16 parts, keyboard, storage, verdict
Sign in to write a comment.
Comments
0