Kurzweil K2661
The Kurzweil K2661 is a 61-key synthesizer workstation from the K2600 generation. It uses Kurzweil's V.A.S.T. architecture, with 60 DSP functions per layer and Triple Modular Processing, plus the KDFX effects engine. It plays 48 voices across 16 MIDI channels, has over 600 ROM programs, 1.5 MB of battery-backed program and sequence RAM and room for up to 128 MB of sample RAM. Instead of a floppy drive it has a SmartMedia card slot, alongside SCSI. Kurzweil states that K2000, K2500 and K2600 libraries are forward compatible with the K2661. Sound On Sound reviewed it in May 2004 and found older material loaded without trouble, but expected more from a new Kurzweil workstation. Programs and other objects can be sent from Master mode as System Exclusive dumps, one object at a time, with the option of including the objects they depend on. A documented protocol lets a computer request any object and receive it back. RAM sample audio is not part of these dumps: it travels with the MIDI Sample Dump Standard.
SysEx messages
0 filesThis instrument is still waiting for its first SysEx.
If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.
Upload a SysExSysEx guide
- Manufacturer ID
- 07
- Model ID
- 78
- Default device ID
- SysEx ID 0 (127 accepts any device ID)
Receiving a dump
1. Press MIDI and go to the RECEIVE page. 2. Set the System Exclusive ID to the device ID used in the file, or to 127 to accept any device ID.
Sending a dump from the instrument
1. Connect the K2661 MIDI Out to the receiver. 2. In Master mode open the Object utilities and choose Dump. 3. Select the objects to send. 4. If they depend on objects not selected, answer the question about dumping dependent objects. 5. Press OK: the objects are sent one by one as System Exclusive. Cancel stops the dump.
Requesting a dump
Send F0 07, the device ID, 78, then message type 00 (DUMP) followed by type (2 bytes), ID number (2), offset (3), size (3) and form (1: 0 = nibblized, 1 = bit stream), then F7. The K2661 answers with a LOAD message (01). Other message types: DACK 02, DNAK 03, DIR 04, INFO 05.
SysEx pitfalls
RAM sample data is not included in object dumps, only the sample objects with their start, alt, loop and end points; RAM samples are sent with the MIDI Sample Dump Standard from the EditSample page. A Master Table dump does not include its dependent objects.
Source: K2661 Musician's Reference, ch. 7 pp. 7-1 and 7-3; K2661 Musician's Guide pp. 10-5 and 11-19
Specifications
- Synthesis
- V.A.S.T. sample playback with 60 DSP functions; Triple Modular Processing with 126 algorithms; KDFX effects
- Polyphony
- 48 sample-playback voices (192 oscillators in total), dynamically allocated
- Multitimbrality
- 16 MIDI channels, each a program of up to 32 layers
- Memory
- Over 600 ROM programs; 1.5 MB battery-backed program and sequence RAM; sample RAM up to 128 MB
- Keyboard / format
- 61 unweighted synth-action keys with mono aftertouch
- Outputs
- 4 balanced outputs (two stereo pairs or four separate) plus a stereo mix pair, headphones; ADAT 8-channel in/out or AES/EBU or S/PDIF out
- MIDI
- MIDI In, Out, Thru (Thru switchable to a copy of Out)
Sources
to be verifiedThese notes have not been checked against the sources yet. Corrections are welcome in the comments.
- Kurzweil K2661 Musician's Reference (ManualsLib copy) — Chapter 7 System Exclusive Protocol: format, manufacturer ID 07, product ID 78h, message types; specifications A-1; MIDI implementation chart
- Kurzweil K2661 Musician's Guide (ManualsLib copy) — SysEx ID on the MIDI RECEIVE page (10-5), Master mode Dump utility (11-19), K2600/K2500/K2000 compatibility files (1-6)
- Kurzweil: K2661 legacy product page ↗ — Specifications, forward compatibility of K2x00 libraries, FAQ on program RAM and Master Table SysEx dump
- Paul Ward, Kurzweil K2661, Sound On Sound, May 2004 ↗ — Review: ROM, SmartMedia, compatibility with older material, verdict
Sign in to write a comment.
Comments
0