Kurzweil PC2
The Kurzweil PC2 is a 76-note performance keyboard that started shipping in March 2000 as the successor of the PC88. It plays 16 MB of Kurzweil ROM sounds, including a stereo grand piano, electric pianos, strings and a KB3 tonewheel organ mode, with 64 voices of polyphony expandable to 128. Two slots take Sound ROM option cards for up to 48 MB of sounds. Setups with four keyboard zones and an arpeggiator make it a master controller as well. The series also included the 88-note PC2X and the PC2R rack. User data is kept in battery-backed memory, powered by a CR2032 lithium cell, so Kurzweil recommends backing it up before changing the battery or installing upgrades. The PC2 can dump a single program, setup or effect, all objects of one type, or all user objects as System Exclusive to a sequencer or librarian. Each object is a separate message, and dumps are reloaded without entering any special mode, provided the Device ID matches.
SysEx messages
0 filesThis instrument is still waiting for its first SysEx.
If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.
Upload a SysExSysEx guide
- Manufacturer ID
- 07
- Default device ID
- Device ID 0 (Global menu, range 0 to 127)
Receiving a dump
1. Make sure the Global parameter Device ID matches the one used when the dump was made (default 0). 2. Connect the MIDI Out of the sending device to the PC2 MIDI In and play the file. No special receive mode is needed. 3. Reselect the received program or setup: the data goes to the memory locations, not to the edit buffer.
Sending a dump from the instrument
Single object or one type: 1. Connect the PC2 MIDI Out to the recorder. 2. In the Program, Setup, KB3 or Effects editor press Store. 3. Press > until the prompt to dump a single object or all objects of the current type. 4. Start recording, then press Yes. Whole memory: 1. Press Global, then > until Dump all Objects? appears. 2. Start recording, then press Enter. The MIDI Xmit LED blinks during the dump.
SysEx pitfalls
Each object is a separate SysEx message. A dump of the entire memory is larger than 64K, so it cannot be loaded into the sequencer of a K2000, K2500 or K2600; dump individual objects instead. The Xmit Buttons parameter (default Off) sends front-panel button presses as SysEx.
Source: PC2 Musician's Guide, part 910345 Rev. A, pp. 4-4, 4-5, 4-9, 4-10, 5-34, 5-35, B-19 ↗
Specifications
- Synthesis
- ROM sample playback with KB3 tonewheel organ mode
- Polyphony
- 64 voices, expandable to 128 with the Polyphony Expansion option
- Multitimbrality
- 16 parts, one per MIDI channel
- Memory
- 256 user program locations (128 regular, 128 KB3) and 128 user setups; 16 MB sound ROM, up to 48 MB with two ROM option cards
- Keyboard / format
- 76 semi-weighted keys with mono pressure (PC2X: 88 keys)
- Outputs
- Two balanced 1/4 inch TRS analog outputs; RCA digital output, S/PDIF or AES/EBU, 48 kHz; headphones
- MIDI
- MIDI In, Out, Thru (Thru switchable to a copy of Out)
Known issues and maintenance
User memory is backed by a CR2032 lithium coin cell; the PC2 warns of a low battery at power-on. Replacing the battery may erase user programs and setups, so dump them first.
Sources
to be verifiedThese notes have not been checked against the sources yet. Corrections are welcome in the comments.
- Kurzweil PC2 Musician's Guide, part 910345 Rev. A (PDF) ↗ — Dumping and reloading objects, Device ID, Dump all objects, battery, specifications, MIDI implementation chart
- Kurzweil: PC2 legacy product page ↗ — Specifications, models, program and setup counts, OS and manual downloads
- Kurzweil: product history (PRODHIST.txt) ↗ — Shipping from March 2000, PC2 and PC2X models
Sign in to write a comment.
Comments
0