Kurzweil PC3
The Kurzweil PC3 is a 76-key performance keyboard that Kurzweil presents as a controller, synthesizer and workstation in one. It plays 128 voices on 16 MIDI channels and combines several engines: Dynamic V.A.S.T. for sample-based programs built on 64 MB of ROM sounds, the VA-1 virtual analogue synth and a KB3 tonewheel organ mode controlled by nine sliders used as drawbars. It also has an unlimited-track sequencer, effects with 16 inserts, four balanced outputs, S/PDIF and USB ports for a computer and for storage. An 88-key version, the PC3X, shares its documentation. User programs, setups and other objects are kept in 16,000 user locations, and 128 MB of non-volatile flash can hold user samples. In Master mode the Object utilities include a Dump function that sends any selection of objects, with their dependent objects if wanted, as a System Exclusive dump out of MIDI Out. Kurzweil warns that dumping everything produces very large dumps. Several PC3s can be told apart by their SysEx ID.
Sign in to upload or commentSysEx messages
0 filesThis instrument is still waiting for its first SysEx.
If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.
Upload a SysExSysEx guide
- Manufacturer ID
- 07
- Default device ID
- SysExID 0 (127 = Omni Receive)
Receiving a dump
On the MIDI mode RECEIVE page set SysExID to match the device ID of the incoming data, or to 127 (Omni Receive) to accept any ID. The default is 0.
Sending a dump from the instrument
1. Connect the PC3 MIDI Out to the receiver. 2. In Master mode press the Object soft button, then Dump. 3. Select the objects to send. 4. If they depend on objects not selected, answer the question Dump dependent objects? 5. Press OK: the objects are sent one by one as System Exclusive. Cancel stops the dump. The object utilities can also be reached with the Object soft button in any Save or Replace dialog of an editor.
SysEx pitfalls
Dumping everything can produce very large dumps: check the limits of the receiving device or software. The guide describes the dump only through the MIDI Out port.
Source: Kurzweil PC3 Getting Started Guide, part 910511, February 2008, pp. 10-4, 11-6 and 11-9
Specifications
- Synthesis
- Dynamic V.A.S.T. sample playback, VA-1 virtual analogue, KB3 tonewheel organ mode
- Polyphony
- 128 voices, dynamically allocated
- Multitimbrality
- 16 parts
- Memory
- 64 MB sound ROM; 16,000 user object locations; 128 MB non-volatile flash for user samples
- Keyboard / format
- 76 semi-weighted keys with velocity and aftertouch
- Outputs
- Four balanced 1/4 inch outputs, headphones, S/PDIF digital output
- MIDI
- MIDI In, Out, Thru (Thru switchable to a copy of Out); USB computer port with MIDI
Sources
to be verifiedThese notes have not been checked against the sources yet. Corrections are welcome in the comments.
- Kurzweil PC3 Getting Started Guide, part 910511, 13 February 2008 (ManualsLib copy) — 64 MB ROM, SysExID on the RECEIVE page, Master mode object utilities and Dump
- Kurzweil: PC3 legacy product page ↗ — Overview and specifications: keyboard, polyphony, engines, memory, effects, outputs, MIDI and USB, downloads
- Kurzweil PC3 Musician's Manual Addendum V2, January 2011 (ManualsLib copy) — Models covered by the PC3 documentation: PC3, PC3X, PC361, X-Pro
Sign in to write a comment.
Comments
0