no image yet
Lexicon · Effect Processor

Lexicon 480L

The Lexicon 480L is a rack-mounted digital effects system controlled from the LARC, a separate remote with sliders and a two-line display, familiar to users of the earlier 224XL. The mainframe runs two processing machines, A and B, and its program banks cover halls, rooms, plates and other reverbs, effects, twin delays, samplers, pitch and Doppler, mastering, compression, Random Halls, Ambience, Prime Time III and more in the version 4 manual. Audio enters on two balanced XLR inputs and leaves on four balanced XLR outputs, with 18-bit equivalent conversion at 48 or 44.1 kHz and PCM 1610-compatible digital I/O. User registers live in internal banks and on a nonvolatile RAM cartridge with its own lithium battery. Programs, presets and registers can be sent and received as MIDI System Exclusive. From Control mode the 480L dumps a single program or preset, banks of ten registers, all internal register banks, cartridge banks, or the active algorithms of Machine A and B with their current values, and it loads dumps automatically when they arrive.

SysEx messages

0 files

This instrument is still waiting for its first SysEx.

If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.

Upload a SysEx

SysEx guide

Manufacturer ID
06
Model ID
01

Receiving a dump

The manual says bulk data loads happen automatically when the MIDI storage device sends the data. No separate enable step was found.

Sending a dump from the instrument

1. Enter Control mode and go to Page 6. 2. Set Slider 1 (SFN) to the dump function (single program or preset, bank, active algorithms, all internal registers). 3. Set Slider 2 (SRC) to the source. 4. Hold STO and press REG to start the dump.

SysEx pitfalls

Header F0 06 01, then a byte with the message class and the channel device ID (0-15), then a subclass byte. Checksums add the bytes and truncate to 7 bits. Active algorithm data is nibblised. In Single configuration only Machine A can be dumped. Cartridge banks need the cartridge inserted.

Source: Lexicon 480L Owner's Manual 070-09360, pp. 2-17, A-6, A-8, A-10

Specifications

Synthesis
Digital reverb and effects system, two machines, 18-bit equivalent linear PCM, 48/44.1 kHz
Multitimbrality
Two processing machines (A and B)
Memory
Program banks in ROM; user registers in internal banks 1-5 and on a nonvolatile RAM cartridge (banks 6-0)
Keyboard / format
19 inch rack mainframe, 19 x 5.25 x 14.5 inch, with LARC remote control
Outputs
4 balanced XLR outputs, 2 balanced XLR inputs, PCM 1610-compatible digital I/O
MIDI
MIDI In, Thru, Out

Sources

to be verified

These notes have not been checked against the sources yet. Corrections are welcome in the comments.

  1. Lexicon 480L Owner's Manual, part 070-09360, 1993 (ManualsLib copy) — Introduction, program banks, MIDI SysEx program dumps, MIDI appendix with SysEx format, specifications
  2. Lexicon 480L Owner's Manual, older edition (ManualsLib copy) — Contents and list of related 480L documents (V3.0, V3.01, V4.0)

Comments

0

Sign in to write a comment.

An unhandled error has occurred. Reload 🗙

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.