no image yet
Lexicon · Effect Processor

Lexicon MPX 1

The Lexicon MPX 1 is a rack-mounted multi-effects processor. It combines six effect types, Pitch, Chorus, EQ, Modulation, Delay and Reverb, which can be routed freely, and Lexicon says it runs up to four stereo effects together with a stereo reverb. It has 200 presets and 50 user programs, balanced analogue inputs and outputs, S/PDIF digital input and output at 44.1 kHz, pedal and footswitch inputs, and MIDI In, Thru and Out. Sound On Sound found its reverbs close to those of the PCM 80 at a lower price and concluded that the MPX1 really delivers. Software version 1.10 added two-way communication with the MPX R1 MIDI remote controller. The Dump function in the System MIDI menu sends the current program, all programs, the three program change maps, the ten program chains or the five setups as System Exclusive, at one of four speeds. A program dump holds the six effect blocks, the routing, the name, the soft row and the tempo settings. The MPX 1 answers BUSY and READY handshake messages while it processes received data.

Sign in to upload or comment

SysEx messages

0 files

This instrument is still waiting for its first SysEx.

If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.

Upload a SysEx

SysEx guide

Manufacturer ID
06
Model ID
09
Default device ID
Receive Device ID 0-126, set in the System MIDI menu (factory value not stated)

Receiving a dump

1. Press System and open the MIDI menu. 2. Set SysEx to On (the default). 3. Set Receive Device ID to the device ID used by the sender.

Sending a dump from the instrument

1. Press System and open the MIDI menu, then Dump. 2. Optionally press Options to choose Xmit Speed (Slow, Medium Slow, Medium Fast, Fast) and press Options again. 3. Choose CurrentPgm, All Programs, Map 1-3, Chain 1-10 or Setup 1-5. 4. Press Store.

Requesting a dump

The MIDI Implementation Details document has a Requests section with a Program Dump request and a Database Dump; a dump can also be started from the front panel.

SysEx pitfalls

Header F0 06 09 then the device ID. Dumps use the current Receive Device ID. Data is sent as nibbles, low nibble first. While processing a received program the MPX 1 sends BUSY and then READY, so a sender should wait for READY. If the unit ignores SysEx, check the SysEx setting and the Receive Device ID.

Source: Lexicon MPX 1 User Guide 070-11097 Rev 1, pp. 5-9, 5-10, 6-8; MPX 1 MIDI Implementation Details 070-11835

Specifications

Synthesis
Digital multi-effects, 6 effect blocks with free routing, 18-bit A/D and 20-bit D/A, 44.1 kHz
Memory
200 presets and 50 user programs (201-250); 3 program change maps, 10 chains, 5 setups
Keyboard / format
Rack unit
Outputs
2 balanced outputs (XLR and 1/4 inch TRS), 2 balanced inputs, S/PDIF coaxial in and out (44.1 kHz only)
MIDI
MIDI In (7-pin DIN, also for a powered remote), Thru, Out

Known issues and maintenance

User data in SRAM is kept by an internal battery (BAT1). A factory reset (hold STORE at power-on) erases user programs. Below about 40 VAC the unit freezes.

Sources

to be verified

These notes have not been checked against the sources yet. Corrections are welcome in the comments.

  1. Lexicon MPX 1 User Guide, part 070-11097 Rev 1 (ManualsLib copy) — Introduction, rear panel, user program numbers, System MIDI menu, Dump, Bulk Data Dumps, troubleshooting, specifications
  2. Lexicon MPX 1 MIDI Implementation Details, part 070-11835 (ManualsLib copy) — SysEx header with Lexicon ID 06 and MPX 1 ID 09, nibble format, handshaking, Program Dump contents
  3. Lexicon MPX 1 Version 1.10 User Guide Addendum, part 070-12467 Rev 1 ↗ — V1.10 features: MPX R1 two-way communication, new presets, routing merge limit
  4. Lexicon MPX 1 Quick Reference Guide, part 070-11098 Rev 1 ↗ — 250 preset and user programs, copyright 1997
  5. Lexicon MPX 1 Service Manual, part 070-12180 (Internet Archive) — Conversion 18-bit A/D and 20-bit D/A, battery-backed SRAM, MIDI connectors
  6. Paul White, Lexicon MPX1, Sound On Sound, January 1997 ↗ — Review: architecture, memory, MIDI and SysEx dumps, verdict
  7. Harman Help Center: MPX-1 Factory Reset ↗ — Factory reset procedure

Comments

0

Sign in to write a comment.

An unhandled error has occurred. Reload 🗙

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.