Lexicon PCM 90
The Lexicon PCM 90 is a one-unit rack digital reverberator reviewed by Sound On Sound in May 1996. It shares the operating system, front panel and digital I/O of the PCM 80 but is dedicated to reverb, with five algorithms: Random Hall, Ambience, Rich Plate, Concert Hall and Chamber/Room. Its 250 factory presets are arranged in five banks of 50, halls, rooms, plates, post and splits, and up to four keywords per effect help with searching. Two internal banks hold 100 user registers, and a PCMCIA card can store up to 1,000 more. Conversion is 18-bit at 44.1 or 48 kHz, with balanced analogue connections on XLR and TRS and S/PDIF digital input and output. Sound On Sound praised the sound and the operating system, noting only slow program changes. From Control mode the PCM 90 dumps the current program, register banks, card banks, program change maps, chains and setups as System Exclusive, and the MIDI documentation adds data requests for most kinds of data. SysEx reception is switched on by default in Control 3.7.
SysEx messages
0 filesThis instrument is still waiting for its first SysEx.
If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.
Upload a SysExSysEx guide
- Manufacturer ID
- 06
- Model ID
- 08
Receiving a dump
1. Press Control and go to matrix position 3.7, SysEx. 2. Make sure it is On (the default). 3. Set the device ID (0-126) to match the sender.
Sending a dump from the instrument
1. Press Control and go to matrix position 3.8, Dump. 2. Turn ADJUST to choose the data: CurrentPgm, Bank R0-R1 (internal registers), a card bank, a program change map, a chain, all internal or card chains, or a setup. 3. Press Store to transmit.
Requesting a dump
The MIDI Implementation Details define a Data Request message (identifier 7F) besides the dump messages: Bank Dump 01, Single Effect Dump 02, Chain Bulk Dump 05, System Setup Dump 18 and others.
SysEx pitfalls
Header F0 06 08 followed by device ID and message identifier. SysEx is ignored unless Control 3.7 is On. Send no more than 3 SysEx messages every 20 ms. Effect data is nibblised, low nibble first. After a bank is received the unit needs about 2 seconds to sort and merge it. Card banks, maps, chains and setups need the card inserted.
Source: Lexicon PCM 90 User Guide 070-10399 Rev 1, pp. 2-14, 5-8; PCM 90 MIDI Implementation Details 070-11485
Specifications
- Synthesis
- Digital reverb, 5 stereo algorithms (Random Hall, Ambience, Rich Plate, Concert Hall, Chamber/Room), 18-bit conversion, 44.1/48 kHz
- Memory
- 250 factory presets (5 banks of 50), 100 internal user registers (2 banks of 50), up to 1,000 registers on a 1 MB PCMCIA card
- Keyboard / format
- 1U rack unit, 483 x 45 x 305 mm
- Outputs
- 2 outputs on 1/4 inch TRS and balanced XLR, 2 inputs on combined XLR/TRS, S/PDIF coaxial in and out
- MIDI
- MIDI In, Thru, Out
Known issues and maintenance
Sound On Sound noted that loading a program takes a little over a second.
Sources
to be verifiedThese notes have not been checked against the sources yet. Corrections are welcome in the comments.
- Lexicon PCM 90 User Guide, part 070-10399 Rev 1 (ManualsLib copy) — Algorithms, presets, registers, cards, Control 3.4 and 3.7, Bulk Data Dumps, specifications
- Lexicon PCM 90 MIDI Implementation Details, part 070-11485 (ManualsLib copy) — SysEx header and identifiers, enabling, timing, nibblised data, Bank Dump, inquiry response
- Lexicon PCM 90 Quick Reference Guide, part 070-11256 Rev 1 ↗ — Banks of presets and registers, modes of operation
- Paul White, Lexicon PCM90, Sound On Sound, May 1996 ↗ — Review: relation to PCM 80, algorithms, memory, SysEx dumping, price, verdict
Sign in to write a comment.
Comments
0