no image yet
Line 6 · Effect Processor

Line 6 POD 2.0

The Line 6 POD 2.0 is a desktop guitar amp modeller, the second software version of the original POD. It reproduces the sound of guitar amplifiers and speaker cabinets and adds delay, tremolo, chorus, flanger, rotary speaker, reverb and a noise gate, so a guitar can be recorded or played through headphones without a real amplifier. Version 2.0 offers 32 amp models, four more than POD 1.x. Original POD owners could upgrade by changing an internal EPROM; later POD 2.0 units have a different processor and an FBV pedal port. The POD 2.0 stores 36 sounds, called channels, in nine banks of four. It has balanced stereo outputs, a headphone jack and MIDI In and Out, and Line 6 offered a free editor and librarian, Line 6 Edit, for Mac and Windows. Sounds travel as System Exclusive messages. The Line 6 SysEx specification for POD describes requests and dumps for one program, the edit buffer and all programs, with each data byte split into two half-bytes; a full dump carries 2556 bytes of data. A dump is accepted only if its data version matches what the POD software expects.

Sign in to upload or comment

SysEx messages

0 files

This instrument is still waiting for its first SysEx.

If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.

Upload a SysEx

SysEx guide

Manufacturer ID
00 01 0C
Model ID
01 (POD ID after manufacturer ID 00 01 0C)

Requesting a dump

From the Line 6 POD SysEx specification: One program: F0 00 01 0C 01 00 00 <program 00-23 hex> F7, answered with a program dump (01 00). Edit buffer: F0 00 01 0C 01 00 01 F7, answered with an edit buffer dump (01 01). All programs: F0 00 01 0C 01 00 02 F7, answered with an all programs dump (01 02).

SysEx pitfalls

Data is sent as high and low nibbles. A single program is 144 nibblised bytes (71 data bytes); all programs are 5184 nibblised bytes (2556 data bytes). Each dump carries a data version byte that must match what the POD software expects, otherwise the POD does not update the patch; the data version is not the software version. The specification was written for POD software V1.2.

Source: Line 6 POD Midi / Sysex Specification and Notes (1999, software V1.2); POD 2.0 Pilot's Handbook Rev B, items 8 and 22 ↗

Specifications

Synthesis
Guitar amp and cabinet modelling with effects
Memory
36 channels in 9 banks of 4 (A-D)
Keyboard / format
Desktop unit
Outputs
Left and Right balanced 1/4 inch TRS outputs (Left for mono), headphones
MIDI
MIDI In, MIDI Out (no Thru)

Known issues and maintenance

The Output Level setting is not stored in memories. Upgrading an original POD to version 2.0 by EPROM erased the user sounds, and Line 6 no longer supplies EPROMs. Newer POD 2.0 units with an FBV pedal port do not work with the older Floor Board and FB4 controllers.

Sources

to be verified

These notes have not been checked against the sources yet. Corrections are welcome in the comments.

  1. Line 6 POD 2.0 Pilot's Handbook, 40-00-0206 Rev B ↗ — Controls and connections, 32 amp models, 36 channels, MIDI and Sysex use, MIDI button for dumps, Line 6 Edit; read by text extraction
  2. Line 6 POD Midi / Sysex Specification and Notes ↗ — SysEx header, POD ID, dump requests and dumps, sizes, nibble format, data version rule; written for POD software V1.2
  3. Line 6 knowledge base: Original POD/POD 2.0 FAQs ↗ — No MIDI Thru, newer POD 2.0 hardware, EPROM upgrades, 4 more amp models than 1.x
  4. Paul White, "Line 6 Pod Pro", Sound On Sound, October 2000 ↗ — POD 2.0 price and EPROM upgrade kit; upgrade erases user sounds

Comments

0

Sign in to write a comment.

An unhandled error has occurred. Reload 🗙

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.