Line 6 POD XT
The Line 6 PODxt is a desktop guitar amp modeller and the successor of the original POD. It brought the modelling developed for the Line 6 Vetta amplifiers to the POD range: models of guitar amplifiers, speaker cabinets and microphones, followed by stomp box, modulation, delay and reverb effects. Line 6 later extended the amp and effect choice with optional Model Packs. The PODxt stores 128 Channel Memories in 32 banks of four, half of them factory sounds and half free for the user, plus 64 effect setups. It has balanced stereo outputs, a headphone jack, MIDI In and Out and a USB port, which carries audio for recording and MIDI for the Line 6 editing software. Sound On Sound described it in 2004 as a successful modelling processor. The Channel Memories, effect setups and amp setups can be sent from the front panel as System Exclusive dumps, either all at once or one item at a time. The PODxt accepts SysEx on any MIDI channel, and a full dump received from another unit replaces all 128 channels.
Sign in to upload or commentSysEx messages
0 filesThis instrument is still waiting for its first SysEx.
If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.
Upload a SysExSysEx guide
- Manufacturer ID
- 00 01 0C
- Default device ID
- MIDI channel 1-16 or Omni (Tune/System > MIDI page); sets only the send channel for SysEx
Receiving a dump
No setting is needed: the manual says PODxt always accepts SysEx data on any MIDI channel. Connect the sender's MIDI Out (or USB with the PODxt USB driver) and send the file. A full dump replaces all 128 Channel Memories.
Sending a dump from the instrument
1. Connect PODxt MIDI Out to the receiver's MIDI In. 2. Press Save once and turn the Select knob to the MIDI dump page. 3. Press the button under Select. 4. Turn the Effect Tweak knob counter-clockwise to choose all channels, or choose one Channel Memory, all Amp Models or all Effects Setups. 5. Press Save again. The display shows sending sysex... standby until the transfer ends.
Requesting a dump
The Pilot's Handbook documents no dump request message; dumps are started from the front panel. Line 6 recommends its Line 6 Edit software for backups.
SysEx pitfalls
The SysEx message format and model ID are not published in the Pilot's Handbook.
Source: Line 6 PODxt Pilot's Handbook, Version 3, Rev H, pp. 4-14 to 4-15 and 7-2 to 7-4 ↗
Specifications
- Synthesis
- Guitar amp, cabinet and effects modelling (Line 6 Point-to-Point modelling from the Vetta amps)
- Memory
- 128 Channel Memories in 32 banks of 4 (banks 1-16 factory, 17-32 user); 64 effect setups
- Keyboard / format
- Desktop unit
- Outputs
- Left and Right balanced 1/4 inch TRS outputs, headphones; USB audio
- MIDI
- MIDI In, MIDI Out (switchable to Thru); USB (MIDI and audio)
Sources
to be verifiedThese notes have not been checked against the sources yet. Corrections are welcome in the comments.
- Line 6 PODxt Pilot's Handbook, Version 3, Rev H (2006) ↗ — Memories, connections, MIDI channel, SysEx behaviour and MIDI dump procedures; read by text extraction
- Line 6 support: PODxt manuals ↗ — List of official PODxt documents
- Paul White, "Line 6 PodXT Pro", Sound On Sound, February 2004 ↗ — 32 amp models, USB, Vetta origin, earlier PODxt review in January 2003
Sign in to write a comment.
Comments
0