no image yet
Novation · Synthesizer · 1993

Novation Bass Station

The Novation Bass Station is a monophonic analogue synthesizer with a two-octave keyboard, released in 1993. Novation describes it as its second hardware product: Chris Huggett built it in the case of the company's MM10 controller keyboard and gave it the filter and amplifier of his earlier Wasp synthesizer. Two oscillators, each a sawtooth or a variable-width pulse, feed a resonant low-pass filter that switches between 12 and 24 dB slopes, shaped by two envelopes and an LFO. It runs on six AA batteries or an optional 9 V adapter. The instrument was aimed at the bass sounds of early 1990s dance music: its manual includes a recipe for imitating the Roland TB-303, and the 12 dB filter mode was designed for that purpose. Filter and envelope knobs send and receive MIDI controllers, so a performance can be recorded into a sequencer, and the 25 full-size keys transmit polyphonically, which lets it double as a small controller keyboard. Julian Colbeck of Sound On Sound called it "Tremendous fun and an almost unqualified bargain". The Bass Station stores seven sounds. According to the owner's manual it can send and receive them over MIDI either one at a time or as a bulk dump of all seven, using four keys of the keyboard as Load and Save buttons while the Utility Mode switch is on Key'b. A stored sound includes the octave setting and the wheel settings. The manual gives no description of the data format.

Sign in to upload or comment

SysEx messages

0 files

This instrument is still waiting for its first SysEx.

If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.

Upload a SysEx

SysEx guide

Manufacturer ID
00 20 29

Receiving a dump

1. Move the Write switch in the Memory section from Protect to Enable. 2. To load one sound, turn the Memory selector to the position that will receive it. 3. Set the Util. Mode switch to Key'b: the keyboard keys now act as function keys. 4. Press the key labelled Load Single (one sound) or Load All (all seven sounds). 5. Send the data from the computer within 20 seconds. The Edit/Write LED flashes rapidly for a few moments when the data has been stored. 6. Return the Write switch to Protect and the Util. Mode switch to its central off position.

Sending a dump from the instrument

1. Make the computer or MIDI data recorder ready to receive from the Bass Station's MIDI Out. 2. To send one sound, turn the Memory selector to that sound. 3. Set the Util. Mode switch to Key'b. 4. Press the key labelled Save Single to send the selected sound, or Save All to send all seven sounds. 5. Return the Util. Mode switch to its central off position.

Requesting a dump

The owner's manual documents no dump request: transfers are started from the instrument with the Save Single and Save All keys.

SysEx pitfalls

After Load Single or Load All is pressed the Bass Station waits 20 seconds; if nothing arrives it returns to normal mode and the key must be pressed again. Loading needs the Write switch on Enable. A single sound is stored in the memory position currently selected; Load All replaces all seven memories. The manual does not describe the format or size of the data and has no MIDI implementation chart.

Source: Novation BassStation Owner's Manual (copyright 1994), pp. 1 and 5-6 ↗

Specifications

Synthesis
Analogue subtractive synthesis
Polyphony
Monophonic (the keyboard transmits polyphonic MIDI data)
Oscillators
2 oscillators, each sawtooth or variable-width pulse (square); oscillator 2 with 16'/8'/4'/2' range, +12 semitones and +/-50 cents detune; pulse width modulation from LFO or Envelope 2
Filter
Low-pass, switchable 12 dB / 24 dB slope, cut-off 5 Hz to 10 kHz, resonance up to self-oscillation, modulated by LFO or Envelope 2
Memory
7 memories, plus a Manual position that follows the panel controls
Keyboard / format
25 full-size velocity-sensitive keys (2 octaves, transposable over 8 octaves), pitch-bend wheel and assignable controller wheel
Outputs
1 line output (1/4 inch jack)
MIDI
MIDI In, MIDI Out

Known issues and maintenance

Batteries. The Bass Station runs on six AA batteries (about 40 hours on alkaline cells) or an optional 9 V DC adapter. When the batteries run down the output becomes distorted. The manual advises removing them if the instrument is not used for a long time, to avoid damage from leakage. No sound from the keyboard. The MIDI transmit and receive channels must be set to the same number, otherwise the keyboard does not play the internal sound. Memory protection. The Write switch must be on Enable to store a sound or to load sounds over MIDI, and should be returned to Protect afterwards. Reviewer's remarks. Sound On Sound (July 1994) found the casing flimsy and the seven memories too few, and measured a longest portamento time well short of the 5 seconds given in the manual.

Sources

to be verified

These notes have not been checked against the sources yet. Corrections are welcome in the comments.

  1. Novation BassStation Analogue Bass Synth Owner's Manual (copyright 1994) ↗ — Controls, voice architecture, memories, loading and saving sounds over MIDI, MIDI controllers, batteries, specification
  2. Novation: The Bass Station Story ↗ — Release in 1993, Chris Huggett's design based on the MM10 case and the Wasp filter and VCA, later Bass Station models
  3. Julian Colbeck, "Novation BassStation", Sound On Sound, July 1994 ↗ — Contemporary review: features, UK price of GBP 349.99, criticisms and verdict
  4. "Analogue action (1)", Scanners, Music Technology, January 1994 ↗ — Launch news with the announced price of GBP 299.99; describes the dumps as SysEx (and gives eight memories, against seven in the manual)
  5. Focusrite Novation downloads: Bass Station Keyboard ↗ — Official legacy downloads page; offers only the user guide

Comments

0

Sign in to write a comment.

An unhandled error has occurred. Reload 🗙

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.