Novation Peak
The Novation Peak is an eight-voice polyphonic desktop synthesiser reviewed by Sound On Sound in May 2017. Novation says it began as the idea of a polyphonic Bass Station II but ended up with a new sound source: three digital oscillators per voice, numerically controlled and generated in an FPGA at 24 MHz, offering sine, triangle, sawtooth and pulse waves plus wavetables. They feed an analogue path with a multimode filter (low-pass, band-pass or high-pass at 12 or 24 dB per octave), distortion stages and VCAs. A 16-slot modulation matrix, four LFOs, three envelopes, an arpeggiator and effects with distortion, delay, chorus and reverb complete the engine, and a CV input accepts modulation from other analogue gear. The Peak plays one sound at a time and stores 512 patches in four banks of 128. Novation recommends its Components online librarian for managing patches, but the user guide also documents a Backup page in the Settings menu that sends the current patch, any bank, all banks, the global settings or everything as System Exclusive through USB or MIDI OUT. Banks sent back to the synth return to the locations they came from and overwrite what is stored there. The guide does not publish the message format.
Sign in to upload or commentSysEx messages
0 filesThis instrument is still waiting for its first SysEx.
If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.
Upload a SysExSysEx guide
- Manufacturer ID
- 00 20 29
- Default device ID
- Not documented for SysEx; global MIDI channel factory setting is 1
Receiving a dump
No receive setting is documented. Send the SysEx file with a utility such as SysEx Librarian or MIDI-OX; patch banks load back into their original locations and overwrite the patches stored there.
Sending a dump from the instrument
1. Press the Settings button and page to the Backup page (page 9 of 10). 2. Set Select to Current, Bank A, Bank B, Bank C, Bank D, A+B+C+D, Settings or ABCD+Set. 3. Set Send To to USBport (default) or MIDIout. 4. Press the lower left screen button, Go.
SysEx pitfalls
Novation recommends the Components online librarian rather than SysEx for patch management. Banks carry their original memory location and overwrite it on import. The SysEx format is not published in the user guide.
Source: Novation Peak User Guide (firmware v1.2), pp. 4, 34, 36-37 ↗
Specifications
- Synthesis
- Hybrid: FPGA-generated numerically controlled oscillators with analogue filter, distortion and VCA
- Polyphony
- 8 voices (unison up to 8 voices per note reduces polyphony)
- Multitimbrality
- Monotimbral
- Oscillators
- 3 per voice: sine, triangle, sawtooth, pulse plus wavetables (60 from firmware v1.2); noise; ring modulator on oscillators 1 and 2
- Filter
- Analogue multimode: low-pass, band-pass or high-pass, 12 or 24 dB/oct, resonance, overdrive
- Memory
- 512 patches in 4 banks (A-D) of 128
- Keyboard / format
- None: desktop module
- Outputs
- L/Mono and Right 1/4 inch TRS outputs (pseudo-balanced), stereo headphones; 3.5 mm CV mod input; 2 pedal inputs
- MIDI
- MIDI In, MIDI Out, MIDI Thru (5-pin DIN), USB (MIDI only, class compliant)
Known issues and maintenance
The v1.2 user guide recommends updating older firmware through Novation Components. Patch Memory Protection in the Settings menu blocks saving patches.
Sources
to be verifiedThese notes have not been checked against the sources yet. Corrections are welcome in the comments.
- Novation Peak User Guide, firmware v1.2 ↗ — Key features, rear panel, patch memory, voices, filter, Settings menu, Backup page, SysEx import, Components
- Novation: Peak product page ↗ — Current specifications, voice modes, mono-timbral, filter type, 512 patches with 256 factory, I/O
- Novation downloads: Peak ↗ — User guides, firmware 2.1 addendum, USB drivers
- Paul Nagle, "Novation Peak", Sound On Sound, May 2017 ↗ — Review on pre-release firmware: date, eight voices, monotimbral, FPGA oscillators, analogue filter, criticisms
Sign in to write a comment.
Comments
0