no image yet
Oberheim · Synthesizer

Oberheim OB-Mx

The Oberheim OB-Mx is an analogue polyphonic synthesizer from the Gibson era of the Oberheim name. Its manual presents it as a way to combine the sounds of the 1970s with current technology and a more accessible interface. Each voice has two oscillators, each able to output three waveforms at once, and two filters: an MM filter modelled on the Minimoog low-pass and an OB state-variable filter with simultaneous low-pass, high-pass and band-pass outputs. Three LFOs and four envelope generators shape each voice. The number of voices depends on the voice hardware installed; the voice diagram shows up to twelve voices summed. Every voice also has its own output with an insert point, beside the main outputs. The OB-Mx stores 128 Single Instruments and 128 Multis in RAM, has further Instruments and Multis in ROM, and holds 19 tuning tables. In Multi mode voices are shared between Parts, by hand or automatically. The MIDI page sends System Exclusive dumps to a sequencer or another OB-Mx: a single Multi or Instrument, banks of 64 Multis or 32 Instruments, tuning tables, global settings or everything at once. Received dumps load automatically when SysEx reception is on. ROM sounds must be copied to RAM before they can be sent.

SysEx messages

0 files

This instrument is still waiting for its first SysEx.

If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.

Upload a SysEx

SysEx guide

Manufacturer ID
10

Receiving a dump

1. Press the MIDI button. 2. Set the SysEx parameter to On. It affects reception only; dumps can be sent with it off. 3. Send the dump: the OB-Mx loads it automatically.

Sending a dump from the instrument

1. Press the MIDI button. 2. In the Send area choose the dump: one Multi or Single Instrument (RAM 1-128), a bank of 64 Multis or 32 Instruments, one or all Tuning Tables, Globals, or Dump All. 3. The Enter button flashes: press it to start the dump. 4. ROM Multis and Instruments (129-256) cannot be sent; copy them to RAM first.

SysEx pitfalls

SysEx dumps from other instrument models are ignored. Setting SysEx reception to Off protects RAM from dumps embedded in sequences.

Source: Oberheim OB-Mx User Manual, MIDI button pp. 52-55, back panel p. 23, Exercise 4 p. 21

Specifications

Synthesis
Analogue subtractive
Polyphony
Depends on the voices installed; the voice diagram shows up to 12 voices
Multitimbrality
Multi mode with Parts; voices assigned per Part or automatically
Oscillators
2 per voice, each with three simultaneous waveforms
Filter
MM low-pass filter (Minimoog style) and OB state-variable filter (low, high and band pass) per voice
Memory
128 RAM and 128 ROM Single Instruments; 128 RAM and 128 ROM Multis; 19 tuning tables
Outputs
Main outputs (1/4 inch) and one individual output per voice with insert point
MIDI
In, Out, Thru

Sources

to be verified

These notes have not been checked against the sources yet. Corrections are welcome in the comments.

  1. Oberheim (Gibson), OB-Mx User Manual (third-party copy on ManualsLib) — Voice architecture, filters, memory, outputs, MIDI ports, System Exclusive dump types and procedure. Third-party OCR copy of the manufacturer document

Comments

0

Sign in to write a comment.

An unhandled error has occurred. Reload 🗙

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.