Oberheim TEO-5
The Oberheim TEO-5 is a five-voice analog polyphonic synthesizer announced at Superbooth in May 2024, with a 44-key keyboard; a desktop module followed. Each voice has two analog oscillators and a sub-oscillator feeding a two-pole SEM-type state-variable filter that moves from low-pass through notch to high-pass, with a band-pass mode. The oscillator cross-modulation offers through-zero FM. Digital effects, a modulation matrix, an arpeggiator and a 64-step polyphonic sequencer complete it. Oberheim presents it as a compact instrument meant to make the company's classic sound widely accessible. Gordon Reid of Sound On Sound found "very little to criticise", while pointing out that the narrow keyboard and five voices will not suit everyone and that the instrument plays one sound at a time. The memory holds 256 factory programs, which cannot be overwritten, and 256 user programs. From the Global menu the TEO-5 sends the current program, the current bank or all user banks as System Exclusive data over USB or the MIDI sockets. A received program returns to the bank and location it was dumped from and replaces what is there. Oberheim publishes the factory programs as SysEx files, and the 64 alternative tunings can also be replaced by SysEx.
Sign in to upload or commentSysEx messages
0 filesThis instrument is still waiting for its first SysEx.
If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.
Upload a SysExSysEx guide
- Manufacturer ID
- 10
- Model ID
- 5A
- Default device ID
- None: the dump messages carry no device ID or channel byte
Receiving a dump
1. Press GLOBAL. 2. Select MIDI Sysex On and set it to On. 3. Select MIDI Sysex Cable and choose USB or MIDI, to match the connection. 4. Send the file from a SysEx utility. The programs replace those in the same bank and locations they were dumped from.
Sending a dump from the instrument
1. Press GLOBAL. 2. Select MIDI Sysex Cable and choose USB or MIDI. 3. Select Dump Preset (current program), Dump Bank (current bank) or Dump All Banks (all user banks). 4. Press WRITE: the data is transmitted.
Requesting a dump
Three requests are documented, each F0 02 5A, a command byte and F7: 05 followed by bank and program number (one program), 06 (edit buffer), 0E (global parameters). The TEO-5 answers with the matching dump. It also answers the universal device inquiry.
SysEx pitfalls
Fixed destination. A dumped program stores its own bank and location: on reception it overwrites that location. The official factory program files load over the user banks. Size. One program is 4,096 bytes, sent as 4,690 MIDI data bytes (packed: seven 8-bit bytes travel as eight MIDI bytes). Edit buffer. A separate message (command 03) carries the edit buffer without a location. Globals. The global parameter dump is sent only on request and is ignored when received; globals are changed with NRPN messages. Wrong port. If nothing is sent or received, check MIDI Sysex Cable.
Source: Oberheim TEO-5 User Manual, pp. 14-15 and 73-74; TEO-5 MIDI Implementation, pp. 2 and 12-15 ↗
Specifications
- Synthesis
- Analog subtractive with digital effects; Sound On Sound notes that loudness is shaped digitally, without analog VCAs
- Polyphony
- 5 voices
- Multitimbrality
- None (one program at a time)
- Oscillators
- 2 analog VCOs per voice (triangle, sawtooth, pulse; shapes can be combined) plus a sub-oscillator; noise; hard sync and X-Mod with through-zero FM
- Filter
- 2-pole SEM-type state-variable analog filter: continuous from low-pass through notch to high-pass, plus a switchable band-pass mode
- Memory
- 512 programs: 256 factory (permanent) and 256 user, in banks of 16; 64 alternative tunings
- Keyboard / format
- 44-key (3.5 octaves) Fatar keyboard with velocity and channel aftertouch (a desktop module also exists)
- Outputs
- Left and right outputs on unbalanced 1/4 inch jacks (switchable to mono); stereo headphone output
- MIDI
- MIDI In, Out and Thru (5-pin DIN); USB (class compliant, MIDI only)
Known issues and maintenance
Tuning. The manual asks the owner to run Cal Voices (Global menu) on first use and to repeat it over the following days and in new environments, so that the instrument learns its temperature range. The Sound On Sound review unit stayed a few cents out at the top of the range even after repeated calibration. USB. Oberheim advises against connecting the TEO-5 to a powered USB hub. Troubleshooting. Reset Globals in the Global menu restores the global settings without touching programs; Oberheim support asks for this and for a calibration before anything else. Status Byte Received In Data. The support page explains this message as an unexpected MIDI message: switch the unit off and on, close other MIDI software and disconnect other MIDI devices.
Sources
to be verifiedThese notes have not been checked against the sources yet. Corrections are welcome in the comments.
- Oberheim TEO-5 User Manual (file TEO-5-User-Manual_v2.pdf) ↗ — Architecture, rear panel, program memory, global settings, calibration, troubleshooting, export and import of programs and banks
- Oberheim TEO-5 MIDI Implementation (file TEO-5-MIDI-Implementation-Document_v2.pdf) ↗ — SysEx messages: device inquiry, dump requests, program, edit buffer and global dumps, packed data format
- Oberheim: TEO-5 Synthesizer (product page) ↗ — Keyboard size, number of programs, effects, sequencer, connections
- Oberheim: Product Support ↗ — Downloads for manuals, factory programs and OS; factory programs load over the user banks; USB behaviour
- Gordon Reid, "Oberheim TEO-5", Sound On Sound, July 2024 ↗ — Review: voice architecture, digital loudness shaping, monotimbral operation, tuning of the review unit, verdict
- "Oberheim TEO-5 polysynth released at Superbooth", Sound On Sound news, 16 May 2024 ↗ — Announcement and availability in May 2024
Sign in to write a comment.
Comments
0