Roland D-10
The Roland D-10 is a 61-key digital synthesizer that Roland dates to 1988-1991. It uses Roland's Linear Arithmetic (LA) synthesis: a Tone is built from one to four partials, and each partial is either a synthesized sawtooth or square wave or one of 256 short PCM samples. Up to 32 partials can sound at once, so polyphony ranges from 32 notes down to 8 depending on the Tone. The keyboard senses velocity but not aftertouch. The D-10 is eight-part multitimbral and includes a rhythm machine with 32 preset and 32 programmable patterns, plus a digital reverb. Sound On Sound described it as identical to the D-20 apart from that model's sequencer and disk drive, and Music Technology presented it in 1988 as the choice for players who already used an external sequencer. Internal memory holds 128 patches, 128 timbres and 64 programmable tones alongside 128 preset tones; an M-256D RAM card stores a further set. The sound and rhythm data can be sent and received over MIDI as System Exclusive from the DATA TRANSFER menu, using its One-way Bulk option, and Roland still publishes the factory sounds as MIDI files to be played into the instrument from a sequencer.
Sign in to upload or commentSysEx messages
0 filesThis instrument is still waiting for its first SysEx.
If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.
Upload a SysExSysEx guide
- Manufacturer ID
- 41
Receiving a dump
1. Press DATA TRANSFER. 2. Use the DISPLAY buttons to reach ONE-WAY BULK SEL. 3. Press UPPER to choose LOAD, then UPPER again to choose ALL. 4. Press ENTER. If WRITE PROTECT is ON, press WRITE to turn it off, then press ENTER. 5. Send the data from the sequencer or computer.
Sending a dump from the instrument
1. Press DATA TRANSFER. 2. Use the DISPLAY buttons to select One-way Bulk. 3. Use the LOWER or UPPER button to select Dump. 4. Press LOWER. 5. Press ENTER. When the transfer is done the display briefly shows 'Complete.'
SysEx pitfalls
Write protect must be off before loading. Loading ALL replaces the internal data.
Specifications
- Produced
- 1988–1991
- Synthesis
- LA (Linear Arithmetic) synthesis: synthesized waves and PCM samples combined as partials
- Polyphony
- 32 voices maximum (32 partials: 32 notes with one-partial Tones, 8 notes with four-partial Tones)
- Multitimbrality
- 8 parts in Multi Timbral mode, plus the rhythm section
- Oscillators
- 1 to 4 partials per Tone; each partial is a sawtooth or square wave or one of 256 PCM samples; ring modulation between paired partials
- Memory
- 128 patches, 128 timbres, 128 preset tones, 64 programmable tones, 32 preset and 32 programmable rhythm patterns; M-256D RAM card for a further set
- Keyboard / format
- 61 keys with velocity, no aftertouch
- Outputs
- Stereo output (left and right) and headphones; no individual outputs
- MIDI
- In, Out, Thru
Known issues and maintenance
There is no built-in factory reset: according to Roland the original factory data must be loaded over MIDI or from a memory card. A memory clear (power on while holding TUNE/FUNCTION and WRITE) erases the internal Tones and Performance Patches and keeps the multitimbral Timbres.
Sources
to be verifiedThese notes have not been checked against the sources yet. Corrections are welcome in the comments.
- Roland Knowledge Base: D-5, D-10, D-20: System Exclusive Data Transfer via MIDI ↗ — One-way Bulk dump and load from the DATA TRANSFER menu
- Roland Knowledge Base: D-20, D-10: Restoring the Factory Settings ↗ — Memory clear, loading all data over MIDI or from a card, write protect
- Roland Knowledge Base: D-10: Technical Specifications ↗ — Years 1988-1991, keyboard, voices, memory, connectors, M-256D card
- Roland US: General Apps & Tools ↗ — Factory patches for the D-10 distributed as .mid files
- Simon Trask, "Roland D20", Music Technology, October 1988 ↗ — LA synthesis, partials, memory card contents, SysEx transfer of sound and rhythm data, D-10 as the D-20 without sequencer and disk, UK prices
- Paul Ireson, "The Production Centre", Sound On Sound, September 1988 ↗ — D-20 review: polyphony, eight parts, reverb, outputs, MIDI sockets; D-10 identical apart from sequencer and disk drive
Sign in to write a comment.
Comments
0