Roland D-70
The Roland D-70 is a 76-key synthesizer that Roland dates to 1990-1994 and labels a Super LA synthesizer. Music Technology introduced it in June 1990 as the first Roland instrument that could be said to replace the D-50 as the company's flagship. Its sounds start from sampled Original Tones held in ROM or on PCM cards, including most cards made for the U-110. A Patch layers up to four Tones, and each Tone passes through its own resonant digital filter (low-pass, band-pass or high-pass) and amplifier, with five-stage envelopes. It plays 30 voices across five synth parts and one rhythm part. Reviewers in 1990 noted the long keyboard with velocity and channel aftertouch, the four front-panel sliders of the Tone Palette for quick changes to the Tones of a Patch, the Analogue Feel pitch drift, and Differential Loop Modulation, which gives harsher timbres reminiscent of ring modulation. Sound On Sound praised its 'first class MIDI spec'; Music Technology called it 'a worthy new flagship synth for Roland' while criticising its screen layouts and an effects section smaller than the D-50's. Internal memory holds 128 patches, 128 tones, 64 performances, 10 user sets and one rhythm setup, and a RAM card stores as many again. According to Roland's support article the internal data can be sent to a sequencer and reloaded as a System Exclusive bulk dump from a menu reached at power-on, and Roland publishes the factory sounds as MIDI files.
Sign in to upload or commentSysEx messages
0 filesThis instrument is still waiting for its first SysEx.
If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.
Upload a SysExSysEx guide
- Manufacturer ID
- 41
- Default device ID
- Unit Number; Roland's article uses 17 (any value, the same for dump and load)
Receiving a dump
1. Press EDIT, then F5 to open the System page. 2. Set Unit Number to 17 (or the number used when the dump was made) and Exclusive RX to On. 3. Switch the D-70 off, then switch it on while holding NUMBER 5. 4. Select F2 [Load All] and press ENTER. 5. Play the data from the sequencer or computer. 6. When loading has finished, switch the D-70 off and on again.
Sending a dump from the instrument
1. Press EDIT, then F5 to open the System page. 2. Set Unit Number to 17 and Exclusive RX to On. 3. Switch the D-70 off, then switch it on while holding NUMBER 5. 4. Select F1 [Dump All]. 5. Start recording on the sequencer or computer, then press ENTER on the D-70. 6. When the transfer has finished, switch the D-70 off and on again.
SysEx pitfalls
The Unit Number must be the same when the dump is sent and when it is loaded. Load All replaces the internal data.
Source: Roland Knowledge Base: 'D-70: Data Transfer via System Exclusive - Bulk Dump/Bulk Load' ↗
Specifications
- Produced
- 1990–1994
- Synthesis
- Super LA: sampled Original Tones (ROM or PCM card) shaped by digital filter and amplifier; optional Differential Loop Modulation
- Polyphony
- 30 voices
- Multitimbrality
- 6 parts: 5 synth parts and 1 rhythm part
- Oscillators
- Up to 4 Tones per Patch, each playing one sampled Original Tone; one LFO per Tone
- Filter
- Digital TVF per Tone: low-pass, band-pass or high-pass with cutoff and resonance, five-stage envelope
- Memory
- Internal: 128 patches, 128 tones, 64 performances, 10 user sets, 1 rhythm setup. RAM card (M-256E): 128 patches, 128 tones, 64 performances, 10 user sets
- Keyboard / format
- 76 keys with velocity and channel aftertouch
- Outputs
- Mix L/R (with effects), Direct L/R (dry), headphones
- MIDI
- In, Out, Thru
Known issues and maintenance
Roland states that the D-70 has no true factory reset. A memory clear (power on while holding NUMBER 8, then ENTER) erases all user data; Roland advises a backup to a RAM card (M-256E or M-512) or a bulk dump first. Factory sounds are then reloaded from a card or over MIDI.
Sources
to be verifiedThese notes have not been checked against the sources yet. Corrections are welcome in the comments.
- Roland Knowledge Base: D-70: Data Transfer via System Exclusive - Bulk Dump/Bulk Load ↗ — Unit Number, Exclusive RX, Dump All and Load All procedure
- Roland Knowledge Base: D-70: Technical Specifications ↗ — Years 1990-1994, keyboard, voices, internal memory, card slots, connectors
- Roland Knowledge Base: D-70: Restoring the Factory Settings ↗ — No true factory reset; memory clear; backup advice
- Roland US: General Apps & Tools ↗ — Factory patches for the D-70 distributed as .mid files
- Simon Trask, "Roland D70", Music Technology, August 1990 ↗ — Review: Tone and Patch structure, filter, memory counts internal and card, effects, PCM cards, criticisms, verdict
- Richard Lamont, "Roland D70", Sound On Sound, July 1990 ↗ — Review: polyphony, parts, filter, outputs, MIDI sockets, cards, Tone Palette, DLM, verdict
- Simon Trask, "Roland D70" (preview), Music Technology, June 1990 ↗ — Position as successor to the D-50, keyboard, display, UK price
Sign in to write a comment.
Comments
0