no image yet
Roland · Synthesizer · 2003

Roland Fantom-S

The Roland Fantom-S is a workstation keyboard released in 2003, in a 61-key version (Fantom-S) and an 88-key hammer-action version (Fantom-S88). It plays 64 voices over 16 parts from 64 MB of waveforms, adds a sampler, 16 velocity-sensitive pads and a 16-track sequencer, and has four SRX expansion slots. It holds 256 user patches, 32 user rhythm sets and 64 user performances, with the same again on a SmartMedia card. The Fantom-S has no front-panel bulk dump. System Exclusive messages carry the system and setup settings and the patch or performance being edited, and they can be requested from a computer. User memory can be written by SysEx only in Librarian mode, which the included librarian software uses; full backups are normally made to a memory card.

Sign in to upload or comment

SysEx messages

0 files

This instrument is still waiting for its first SysEx.

If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.

Upload a SysEx

SysEx guide

Manufacturer ID
41
Model ID
00 6B
Default device ID
Device ID 17-32 (dev byte 10H-1FH)
Suggested delay between messages
20 ms

Receiving a dump

1. In SYSTEM > MIDI, set Receive Exclusive to ON. 2. Set Device ID to match the other device. 3. To let SysEx overwrite user memory, press MENU, select Librarian and press ENTER. The panel is locked while Librarian mode is active; press EXIT to leave it.

Requesting a dump

Send a Roland data request RQ1: F0 41, device ID, 00 6B 11, a 4-byte address, a 4-byte size, the checksum and F7. Requests must use the fixed start address and size given in the parameter address map. The map covers Setup (01 00 00 00), System (02 00 00 00) and the temporary performance and patch areas (10 00 00 00 to 1F 20 00 00), not the user memory.

SysEx pitfalls

No bulk dump of the user memory is documented: the address map lists only setup, system and temporary areas. Data larger than 256 bytes is split into packets sent about 20 ms apart. RQ1 and DT1 are ignored when Receive Exclusive is OFF.

Source: Roland Fantom-S/S88 Owner's Manual (2003), pp. 192-193, 199; Sound/Parameter List, MIDI implementation and address map (p. 58) ↗

Specifications

Synthesis
Sample-based (PCM waveforms) with sampling
Polyphony
64 voices (shared with the sampling section)
Multitimbrality
16 parts
Oscillators
64 MB wave memory, 1,228 waveforms; 4 SRX expansion slots
Filter
One per tone: low-pass (LPF, LPF2, LPF3), band-pass, high-pass or peaking
Memory
256 user patches, 32 user rhythm sets, 64 user performances; same on SmartMedia card; Fantom-S 640 and S88 648 preset patches plus 256 GM2
Keyboard / format
Fantom-S: 61 keys; Fantom-S88: 88 keys, Progressive Hammer action; velocity and channel aftertouch; 16 pads
Outputs
A (Mix) L/R, B L/R, headphones, digital coaxial and optical out; audio inputs L/mic, R
MIDI
MIDI In, Out, Thru; USB for file transfer (mass storage)

Sources

to be verified

These notes have not been checked against the sources yet. Corrections are welcome in the comments.

  1. Roland Fantom-S/Fantom-S88 Owner's Manual (2003) ↗ — Memory p. 19, MIDI settings pp. 192-193, User Backup p. 196, Librarian mode p. 199, specifications p. 217
  2. Roland Fantom-S/Fantom-S88 Sound/Parameter List ↗ — MIDI implementation: model ID 00H 6BH, RQ1, DT1, 20 ms packet interval, parameter address map
  3. Nick Magnus, "Roland Fantom S & S88", Sound On Sound, October 2003 ↗ — Launch review: prices, storage, editor and librarian software, verdict

Comments

0

Sign in to write a comment.

An unhandled error has occurred. Reload 🗙

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.