no image yet
Roland · Synthesizer · 2004

Roland Fantom-X

The Roland Fantom-X is a workstation keyboard released in 2004 in three sizes: the 61-key X6, the 76-key X7 and the 88-key hammer-action X8, all with the same specifications. It plays 128 voices over 16 parts from 128 MB of waveforms, adds a sampler, 16 pads, a sequencer, a colour screen and four SRX expansion slots, and holds 256 user patches, 32 rhythm sets and 64 performances. Sound On Sound described it as a revision of the Fantom-S. There is no front-panel bulk dump. System Exclusive messages carry the system and setup settings and the patch or performance being edited, and they can be requested from a computer. User memory can be written by SysEx only in Librarian mode, which the supplied librarian software needs.

Sign in to upload or comment

SysEx messages

0 files

This instrument is still waiting for its first SysEx.

If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.

Upload a SysEx

SysEx guide

Manufacturer ID
41
Model ID
00 6B
Default device ID
Device ID 17-32 (dev byte 10H-1FH)
Suggested delay between messages
20 ms

Receiving a dump

1. In SYSTEM > MIDI, set Receive Exclusive to ON and set Device ID to match the other device. 2. To let SysEx overwrite user memory, press MENU, select Utility and press ENTER, then press F4 (Librarian). The panel is locked in Librarian mode. 3. Press EXIT or F8 (EXIT) to return to normal operation.

Requesting a dump

Send a Roland data request RQ1: F0 41, device ID, 00 6B 11, a 4-byte address, a 4-byte size, the checksum and F7. The address map covers Setup (01 00 00 00), System (02 00 00 00) and the temporary performance and patch areas (10 00 00 00 to 1F 20 00 00), not the user memory.

SysEx pitfalls

No bulk dump of the user memory is documented. Data can be written to the user area only in Librarian mode. Data larger than 256 bytes is split into packets sent about 20 ms apart.

Source: Roland Fantom-X6/X7/X8 Owner's Manual (2004), pp. 230-231, 236, troubleshooting and MIDI implementation ↗

Specifications

Synthesis
Sample-based (PCM waveforms) with sampling
Polyphony
128 voices (shared with the sampling section)
Multitimbrality
16 parts
Oscillators
128 MB wave memory, 1,480 waveforms; 4 SRX expansion slots
Filter
One per tone: low-pass (LPF, LPF2, LPF3), band-pass, high-pass or peaking
Memory
256 user patches, 32 user rhythm sets, 64 user performances, same on PC card; 1,024 preset patches plus 256 GM2
Keyboard / format
X6: 61 keys, X7: 76 keys, X8: 88 keys Progressive Hammer action; velocity and channel aftertouch; 16 pads
Outputs
A (Mix) L/mono, R; B L, R; headphones; audio inputs L/mic, R; coaxial digital in/out
MIDI
MIDI In, Out, Thru; USB (file transfer and MIDI)

Sources

to be verified

These notes have not been checked against the sources yet. Corrections are welcome in the comments.

  1. Roland Fantom-X6/X7/X8 Owner's Manual (2004) ↗ — MIDI settings pp. 230-231, User Backup p. 235, Librarian mode p. 236, specifications pp. 333-334, MIDI implementation and address map
  2. Paul Nagle, "Roland Fantom X", Sound On Sound, September 2004 ↗ — Review: three keyboard sizes with identical specifications, changes from the Fantom-S, USB MIDI mode, verdict

Comments

0

Sign in to write a comment.

An unhandled error has occurred. Reload 🗙

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.