no image yet
Roland · Synthesizer

Roland GR-50

The Roland GR-50 is a rack-mounted guitar synthesizer: a sound module and a guitar-to-MIDI converter in one unit, played from an electric guitar fitted with Roland's GK-2 synthesizer driver. Sound On Sound's history of Roland calls it the first of the company's digital guitar synth units. Its sounds come from LA synthesis, the method of the Roland D-series: a tone is built from up to four partials, each either a PCM sample or a synthesizer partial, and a digital reverb is built in. A patch holds two parts, a rhythm setup, reverb settings and settings for each string, and two sounds can be given to every string. Roland lists 32 voices, 64 patches, 128 preset tones and 64 user tones, with further storage on a memory card. The GR-50 also drives other MIDI instruments from the guitar. Music Technology's 1989 review found the response of the internal sounds fast and accurate, and criticised the layered programming and the lack of individual outputs. The GR-50 accepts its data as System Exclusive messages over MIDI. Roland publishes the original factory data as MIDI files and explains how to load them: memory protection has to be switched off and the exclusive unit number set to 17. The display gives no sign while data is being received.

Sign in to upload or comment

SysEx messages

0 files

This instrument is still waiting for its first SysEx.

If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.

Upload a SysEx

SysEx guide

Manufacturer ID
41
Default device ID
Unit number 17 (the value Roland specifies for its factory data)

Receiving a dump

1. Set the switch on the rear panel to MIDI. 2. Connect the MIDI Out of the computer or sequencer to the MIDI In of the GR-50. 3. Press SYSTEM: the display shows System, Mem Protect = On. 4. Press VALUE + or - until Mem Protect is Off. 5. Press PARAM A UP (the GROUP button) until the display shows System, Exclu Unit # = 17. If the number is different, set it to 17 with VALUE + or -. 6. Send the data. When all of it has arrived the GR-50 returns to the play menu.

SysEx pitfalls

The display does not show that the GR-50 is receiving System Exclusive data. Memory protection must be off and the rear switch must be set to MIDI, otherwise the data is not loaded.

Source: Roland Knowledge Base, GR-50: Loading Factory Files ↗

Specifications

Produced
until 1994
Synthesis
LA (Linear Arithmetic) synthesis: tones of up to four partials, PCM samples or synthesizer partials; built-in digital reverb
Polyphony
32 voices maximum; the number of notes depends on how many partials each tone uses
Multitimbrality
Two parts and a rhythm setup per patch; two sounds can be assigned to each string
Oscillators
Up to 4 partials per tone, each a PCM sample or a synthesizer partial
Memory
64 patches, 128 timbres, 128 preset tones, 64 user tones, 5 patch chains; further patches, timbres and tones on an M-256D or M-256E memory card
Keyboard / format
1U rack module, played from a guitar fitted with the GK-2 synthesizer driver
Outputs
Two mix outputs, guitar output, headphone socket
MIDI
MIDI In, Out, Thru; RRC In connector, with a MIDI/RRC selector switch

Sources

to be verified

These notes have not been checked against the sources yet. Corrections are welcome in the comments.

  1. Roland Knowledge Base: GR-50: Loading Factory Files ↗ — Loading System Exclusive data: MIDI/RRC switch, memory protect, exclusive unit number 17, no indication on the display
  2. Roland Knowledge Base: GR-50: Technical Specifications ↗ — Sound source, 32 voices, memory, memory cards, front and rear panel, dimensions, options; heading with the years 1988-1994
  3. Roland Knowledge Base: GR-50: MIDI Out Parameters in the GR-50 ↗ — Driving other MIDI instruments from the guitar: two MIDI Out branches, poly and mono mode
  4. Roland support: Factory Patches (D-series, JUNO-1/2, MKS-series, U-series, GP-8, GR-50) ↗ — Roland publishes the factory data of the GR-50 as .mid files
  5. Aaron Hallas, "Roland GR50: Guitar Synthesiser", Music Technology, August 1989 ↗ — Contemporary review: LA synthesis and partials, patch structure, GK-2, tracking, criticisms, UK prices
  6. Gordon Reid, "The History Of Roland: Part 3", Sound On Sound, January 2005 ↗ — GR-50 and GK-2 among the 1989 launches; first of Roland's digital guitar synth units

Comments

0

Sign in to write a comment.

An unhandled error has occurred. Reload 🗙

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.