Roland Integra-7
The Roland INTEGRA-7 is a 16-part sound module introduced in 2012. It brings together five sound engines: SuperNATURAL Acoustic, SuperNATURAL Synth and SuperNATURAL Drum, plus the PCM Synth and PCM Drum engines. Four virtual expansion slots load titles from the SRX series and other Roland expansion libraries, and the unit has over 6,000 built-in sounds, 128 voices of polyphony, 16 multi-effects and Motional Surround positioning. The INTEGRA-7 uses Roland System Exclusive messages with model ID 00H 00H 64H. They cover the system settings, the current Studio Set and the tone loaded in each of the 16 parts, which an editor or sequencer can change or read back with data requests. The user tones and Studio Sets themselves are not part of the SysEx map: they are saved to USB memory.
Sign in to upload or commentSysEx messages
0 filesThis instrument is still waiting for its first SysEx.
If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.
Upload a SysExSysEx guide
- Manufacturer ID
- 41
- Model ID
- 00 00 64
- Default device ID
- dev byte 10H-1FH (17 in the MIDI implementation examples)
- Suggested delay between messages
- 20 ms
Requesting a dump
Send a Roland data request RQ1: F0 41, device ID, 00 00 64 11, a 4-byte address, a 4-byte size, the checksum and F7. The temporary Studio Set is at 18 00 00 00 and the temporary tones of parts 1-16 run from 19 00 00 00 to 1C 60 00 00.
SysEx pitfalls
The address map has no user tone or Studio Set area, so SysEx cannot back up user memory; Sound On Sound describes saving user sounds and Studio Sets to USB memory. Data over 256 bytes is sent in packets about 20 ms apart.
Specifications
- Synthesis
- SuperNATURAL Acoustic, SuperNATURAL Synth, SuperNATURAL Drum, PCM Synth and PCM Drum engines
- Polyphony
- 128 voices (varies with the sound generator load)
- Multitimbrality
- 16 parts (Studio Set)
- Memory
- 64 Studio Sets; user tones: 256 SN Acoustic, 512 SN Synth, 64 SN Drum, 256 PCM Synth, 32 PCM Drum; 4 virtual expansion slots
- Keyboard / format
- Sound module, 481 x 262 x 89 mm
- Outputs
- Output A (Mix) L/R on TRS and XLR; outputs B, C, D L/R; headphones; coaxial digital out; front and rear inputs
- MIDI
- MIDI In, Out, Thru; USB (audio and MIDI); USB memory port
Sources
to be verifiedThese notes have not been checked against the sources yet. Corrections are welcome in the comments.
- Roland INTEGRA-7 MIDI Implementation, Version 1.00, September 1, 2012 ↗ — Model ID 00H 00H 64H, RQ1 and DT1, 20 ms packet interval, address map (temporary areas only)
- Roland INTEGRA-7 specifications ↗ — Sound engines, polyphony, parts, expansion slots, effects, connectors, size; product marked discontinued
- Roland U.S. blog, Roland Synth Chronicle: 1973 - 2014 ↗ — Lists the INTEGRA-7 under 2012
- Gordon Reid, "Roland Integra 7", Sound On Sound, February 2013 ↗ — Review: Studio Sets, user tone memory counts, USB memory storage, iPad editor, verdict
Sign in to write a comment.
Comments
0