Roland Juno-106
The Roland Juno-106 is a six-voice programmable analog synthesizer with a 61-key keyboard, released in February 1984 as the third instrument of the Juno family and the first with MIDI. Each voice has a digitally controlled oscillator (DCO) with sawtooth, pulse, sub-oscillator and noise, a four-position high-pass filter, a 24 dB/octave low-pass filter that can self-oscillate, one envelope and an LFO. A two-mode stereo analog chorus completes the sound. It stores 128 patches against the 56 of the Juno-60 and adds polyphonic portamento, but has no arpeggiator. Reviewing it in May 1984, Electronics & Music Maker called it "an impressive instrument, well-designed and a joy to play". Roland later used the same circuitry in the HS-60, a version with built-in speakers. Patches are backed up through a cassette tape interface. Over MIDI the Juno-106 uses System Exclusive only when the rear-panel MIDI Function switch is in position III: selecting a patch then transmits all of its parameters, and moving a panel control transmits that parameter. The owner's manual describes this as a live exchange between two Juno-106s or with a computer.
Sign in to upload or commentSysEx messages
0 filesThis instrument is still waiting for its first SysEx.
If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.
Upload a SysExSysEx guide
- Manufacturer ID
- 41
- Default device ID
- MIDI channel 1 (selected automatically at every power-on)
Receiving a dump
1. Set the MIDI Function switch on the rear panel to III: System Exclusive is ignored in positions I and II. 2. If needed set the MIDI channel: hold the MIDI Channel button and press a Bank or Patch Number button; the display shows the new channel.
Sending a dump from the instrument
There is no bulk dump command. With the MIDI Function switch on III: 1. Select a patch: all parameters of that patch are transmitted as System Exclusive (the patch number is not sent). 2. Move any panel control: that parameter is transmitted.
SysEx pitfalls
The manual describes no way to send or receive the whole patch memory over MIDI: full backups go through the tape interface (Save, Verify, Load), one bank group at a time. The MIDI channel returns to 1 at every power-on. Signals arriving at MIDI In are not passed to MIDI Out.
Specifications
- Synthesis
- Analog subtractive with digitally controlled oscillators (DCO)
- Polyphony
- 6 voices
- Oscillators
- Six DCOs (one per voice): sawtooth, pulse with manual or LFO pulse width modulation, sub-oscillator, noise; range 16', 8', 4'
- Filter
- 24 dB/octave resonant low-pass VCF (self-oscillating) and a non-resonant high-pass filter with four positions
- Memory
- 128 patches in two groups (A and B) of 8 banks x 8 patches, battery backed; tape interface for backup
- Keyboard / format
- 61 keys, 5 octaves
- Outputs
- Mono and stereo output jacks, stereo headphone jack
- MIDI
- MIDI In, Out and Thru
Known issues and maintenance
The patch memory is kept by a backup battery, which the owner's manual says should be replaced every five years. A Memory Protect switch is on the rear panel.
Sources
to be verifiedThese notes have not been checked against the sources yet. Corrections are welcome in the comments.
- Roland JUNO-106 Owner's Manual ↗ — Memory, battery, tape interface, MIDI function switch and System Exclusive, specifications. The Roland scan has no text: read from the OCR text of the same manual on ManualsLib (manual 1185829)
- Roland Icon Series: The JUNO-106 Synthesizer (Roland blog) ↗ — Release in February 1984, voice architecture, chorus, first Juno with MIDI, HS-60 variant
- Roland 50th Anniversary: 1980s ↗ — Year 1984, third instrument of the Juno range, launch price
- Geoff Twigg, "Roland Juno 106 Polysynth", Electronics & Music Maker, May 1984 ↗ — Comparison with the Juno-60, portamento, missing arpeggiator, price, verdict
- "The MIDI Juno" (Roland Newslink), Electronic Soundmaker & Computer Music, June 1984 ↗ — The three MIDI modes as presented by Roland UK at launch
Sign in to write a comment.
Comments
0