Roland JV-880
The Roland JV-880 is a one-unit rack synthesizer module, reviewed in the UK at the end of 1992 as the rack version of the JV-80 keyboard. Its sounds are built from sampled waveforms: the module holds 129 of them, and a patch combines up to four tones. It plays 28 voices across seven parts plus a rhythm part, with reverb or delay and chorus, and has separate main and sub stereo outputs. The memory holds two preset banks and one user bank, each with 64 patches, 16 performances and a rhythm set; a data card adds one more bank. A PCM card slot and an internal SR-JV80 series expansion board add waveforms. Sound On Sound concluded that "Roland have a real winner on their hands here". The JV-880 sends its data as Roland System Exclusive messages. A bulk dump, started from the Utility menu, transmits the performances, patches and rhythm set of the internal memory or of the data card; a temporary dump transmits only what is currently being played or edited. The transfer is one-way, with no handshake, and the unit numbers of sender and receiver must match.
Sign in to upload or commentSysEx messages
0 filesThis instrument is still waiting for its first SysEx.
If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.
Upload a SysExSysEx guide
- Manufacturer ID
- 41
- Model ID
- 46
- Default device ID
- Unit number minus 1 (manual example: unit number 17 = 10H)
Receiving a dump
1. In the System parameters, set 'System MIDI Rx switch: Exclusive' to ON. 2. Set the same unit number on the JV-880 and in the data being sent (the device ID byte is the unit number minus 1).
Sending a dump from the instrument
1. Connect MIDI OUT of the JV-880 to MIDI IN of the receiver. 2. Press UTILITY (the indicator lights). 3. Move the cursor to the top line of the display and turn the DATA dial to 'Bulk dump'. 4. Move the cursor to the bottom line and choose INT -> MIDI (internal memory) or CARD -> MIDI (data card). 5. Press ENTER. The display shows 'Now Sending', then 'Complete'. To send only the sound being edited, choose 'Temporary dump' in step 3 and then PERFORMANCE, PATCH, RHYTHM or ALL.
Requesting a dump
The JV-880 recognizes Roland Request Data 1 (RQ1): F0 41, device ID, 46 11, a 4-byte address, a 4-byte size, checksum, F7. The manual lists RQ1 as receive only: the JV-880 itself never sends it. Data travels as Data Set 1 (DT1, command 12) messages.
SysEx pitfalls
One-way transfer with no handshaking. Unit numbers of sender and receiver must match. If a transfer is interrupted, all data in the destination is destroyed. Memory protect is ON after every power-up and prevents writing to internal memory. GS exclusive messages (model ID 42H) are ignored except scale tune.
Source: Roland JV-880 Owner's Manual, PDF pp. 64, 179-181, 185 and 222 ↗
Specifications
- Synthesis
- Sample-based synthesis: 129 internal waveforms, up to four tones per patch
- Polyphony
- 28 voices
- Multitimbrality
- 8 parts: parts 1-7 plus a rhythm part
- Oscillators
- Up to 4 tones per patch, each playing one of 129 internal waveforms (more from PCM cards and an SR-JV80 expansion board)
- Memory
- Preset A and B: 64 patches, 16 performances, 1 rhythm set each. Internal: 64 patches, 16 performances, 1 rhythm set. DATA card: 64 patches, 16 performances, 1 rhythm set
- Keyboard / format
- 1U rack module (EIA), 482 x 358 x 45 mm, 4.2 kg
- Outputs
- MAIN OUTPUT L/R, SUB OUTPUT L/R, headphones jack
- MIDI
- MIDI IN, OUT, THRU
Known issues and maintenance
Memory protect is switched on automatically at every power-up; while it is on, data cannot be written to the internal memory. The manual warns that an interrupted data transfer destroys all data in the destination.
Sources
to be verifiedThese notes have not been checked against the sources yet. Corrections are welcome in the comments.
- Roland JV-880 Owner's Manual ↗ — Specifications, bulk dump and temporary dump, memory protect, exclusive receive switch, System Exclusive format and model ID
- Vic Lennard, "Roland JV880", Music Technology, December 1992 ↗ — Date of the first UK review, relation to the JV-80, tones per patch, expansion board, price
- Paul Ireson, "Breaking With The Rack Pack", Sound On Sound, March 1993 ↗ — Rack derivative of the JV-80, effects, outputs, reviewer's verdict
Sign in to write a comment.
Comments
0