no image yet
Roland · Controller · 1987

Roland PG-1000

The Roland PG-1000 is a hardware programmer released in 1987 for the D-50 Linear Synthesizer. It has no sound of its own: its 56 edit knobs, display and selector buttons give direct access to the tone, partial and patch parameters of the D-50. Every knob movement is sent as a Roland System Exclusive message, so the unit only works with instruments that accept the D-50 exclusive messages. A Parameter Request button asks the D-50 for the current patch so the knobs can be compared and monitored against it, and MIDI messages arriving at its MIDI IN are merged with the editing data. On SysEx terms the PG-1000 is a source of D-50 parameter messages (DT1) and of one request (RQ1) for the whole 421-byte edit buffer.

Sign in to upload or comment

SysEx messages

0 files

This instrument is still waiting for its first SysEx.

If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.

Upload a SysEx

SysEx guide

Manufacturer ID
41
Model ID
14
Default device ID
MIDI channel 1 (device ID = channel - 1)

Receiving a dump

1. Set the D-50 basic channel to the same number as the PG-1000 MIDI channel (default 1). 2. Set Exclusive in the D-50 MIDI functions to ON. 3. To copy a D-50 patch into the programmer, also connect the D-50 MIDI OUT to the PG-1000 Parameter IN.

Sending a dump from the instrument

The PG-1000 has no memory to dump. Pressing Manual sends the positions of all knobs to the D-50 as DT1 messages. Pressing Manual twice while holding Partial Mute sends the patch write message (address 00-20-00).

Requesting a dump

Press Parameter Request: the PG-1000 sends RQ1 (F0 41, device ID, 14 11, address 00 00 00, size 00 03 25, checksum, F7) and the D-50 answers with 421 bytes of DT1 on Parameter IN. The display shows Data Received, or Receiving Error if the connection is wrong.

SysEx pitfalls

Only works with instruments that receive D-50 exclusive messages. The edit is lost if the patch is not written on the D-50. Messages received at Parameter IN are not passed to MIDI OUT or THRU.

Source: Roland PG-1000 Owner's Manual (1987), pp. 5-9 and MIDI implementation (version 1.00) ↗

Specifications

Memory
None: edits go to the D-50 edit buffer and must be written on the D-50
Keyboard / format
Desktop programmer, 56 edit knobs, 318 x 268 x 53 mm, 1.6 kg
MIDI
MIDI In, Out, Thru, Parameter In

Known issues and maintenance

Active Sense Err appears when the signal at MIDI IN stops. Turn the D-50 on before the PG-1000.

Sources

to be verified

These notes have not been checked against the sources yet. Corrections are welcome in the comments.

  1. Roland PG-1000 Owner's Manual (1987) ↗ — Introduction p. 5, connections and preparation pp. 6-7, Parameter Request p. 9, specifications p. 15, MIDI implementation dated Feb. 6, 1987 (model ID 14H, RQ1, DT1, address map)

Comments

0

Sign in to write a comment.

An unhandled error has occurred. Reload 🗙

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.